Hi everyone,
I have placed an X-Clarity of a Lenovo server under monitoring via the plugin.
How can I set the warning and critical limits for the ambient temperature?
The plugin I used is as follows:
https://docs.centreon.com/pp/integrations/plugin-packs/procedures/hardware-servers-lenovo-xcc-snmp/
I tried to add the fields --warning='temperature,.*,30' and --critical='temperature,.*,40' in the Service Hardware-Global, but the rule is applied to all temperatures.
I only need to apply it to the ambient temperature one, from the Performance Data:
'temp_Ambient Temp'=20C;0:43;0:47;; 'temp_Exhaust Temp'=43C;;;; 'temp_CPU 1 Temp'=54C;;;; 'temp_CPU 1 DTS'=-40.6C;;0:-0.2;; 'temp_CPU 2 Temp'=51C;;;; 'temp_CPU 2 DTS'=-44.0C;;0:-0.2;; 'temp_DIMM 1 Temp'=26C;0:85;0:87;; 'temp_DIMM 3 Temp'=26C;0:85;0:87;; 'temp_DIMM 5 Temp'=27C;0:85;0:87;; 'temp_DIMM 7 Temp'=29C;0:85;0:87;; 'temp_DIMM 10 Temp'=28C;0:85;0:87;; 'temp_DIMM 12 Temp'=27C;0:85;0:87;; 'temp_DIMM 14 Temp'=27C;0:85;0:87;; 'temp_DIMM 16 Temp'=27C;0:85;0:87;; 'temp_DIMM 17 Temp'=27C;0:85;0:87;; 'temp_DIMM 19 Temp'=28C;0:85;0:87;; 'temp_DIMM 21 Temp'=28C;0:85;0:87;; 'temp_DIMM 23 Temp'=29C;0:85;0:87;; 'temp_DIMM 26 Temp'=30C;0:85;0:87;; 'temp_DIMM 28 Temp'=29C;0:85;0:87;; 'temp_DIMM 30 Temp'=28C;0:85;0:87;; 'temp_DIMM 32 Temp'=28C;0:85;0:87;; 'temp_PCH Temp'=38C;0:255;0:255;; 'volt_CMOS Battery'=3.1590;2.3920:;2.2490:;; 'volt_SysBrd 12V'=12.040;;10.808:13.216;; 'volt_SysBrd 5V'=4.9842;;4.4928:5.4990;; 'volt_SysBrd 3.3V'=3.2705;;2.9760:3.6270;; 'fan_Fan 1 Front Tach'=31%;;;0;100 'fan_Fan 2 Front Tach'=31%;;;0;100 'fan_Fan 3 Front Tach'=31%;;;0;100 'fan_Fan 4 Front Tach'=31%;;;0;100 'fan_Fan 5 Front Tach'=31%;;;0;100 'fan_Fan 6 Front Tach'=31%;;;0;100 'fan_Fan 7 Front Tach'=31%;;;0;100 'fan_Fan 8 Front Tach'=31%;;;0;100 'fan_Fan 1 Rear Tach'=29%;;;0;100 'fan_Fan 2 Rear Tach'=30%;;;0;100 'fan_Fan 3 Rear Tach'=29%;;;0;100 'fan_Fan 4 Rear Tach'=29%;;;0;100 'fan_Fan 5 Rear Tach'=30%;;;0;100 'fan_Fan 6 Rear Tach'=30%;;;0;100 'fan_Fan 7 Rear Tach'=30%;;;0;100 'fan_Fan 8 Rear Tach'=30%;;;0;100 'count_disk'=2;;;; 'count_fan'=16;;;; 'count_psu'=2;;;; 'count_temperature'=23;;;; 'count_voltage'=4;;;;
So only to the field 'temp_Ambient Temp'=20C;0:43;0:47;
How can I do that?
Thanks
Regards
