I am trying to monitor HP server components using template "HW-HP-Server-Hardware-Global-SNMP" with custom macros,
COMPONENT = .*
EXTRAOPTIONS = --verbose
It displays below result notifying as "checking" but not showing actual results.
Can someone please guide me on what I'm missing in this configuration.
OK: All 0 components are ok .
Product Name: unknown, Serial: unknown, Rom Version: unknown
Checking ide controllers
Checking ide logical drives
Checking ide physical drives
Checking power converters
Checking power supplies
Checking sas controllers
Checking sas logical drives
Checking sas physical drives
Checking scsi controllers
Checking scsi logical drives
Checking scsi physical drives
Checking fca host controller
Checking fca external controller
Checking fca external accelerator boards
Checking fca logical drives
Checking fca physical drives
Checking da controller
Checking da accelerator boards
Checking da logical drives
Checking da physical drives
Checking physical nics
Checking logical nics
@mmnawab can you try to run following command with your SNMP information:
This info I received after running the command
SNMPv2-SMI::enterprises.220.127.116.11.0 = No Such Object available on this agent at this OID
Your HP server is an HP Proliant or another one?
HP ProLiant DL380 Gen10
Hum should work, the SNMP community have enough rights to read all OIDs?
I am stuck on the same HW-HP-Server-Hardware-Global-SNMP is still showing checking and not displaying any results.
Would highly appreciate it if someone someone could please assist.
What is the meaning of this and what needs to be done to resolve it ?
.18.104.22.168.22.214.171.124.126.96.36.199 = undef
.188.8.131.52.184.108.40.206.220.127.116.11 = undef
.18.104.22.168.22.214.171.124.126.96.36.199 = undef
it is showing this message while trying to run HW-HP-Server-Hardware-Global-SNMP
It means that the plugin try to get values associated to this OIDs but the SNMP of the equipment says that their is no associated value (undef).
So maybe you are not in the latest version of the firmware on your equipment or this king of equipment can’t be monitored using default HP Proliant OIDs.
you can check component with ILO interface.
/usr/lib/centreon/plugins//centreon_hp_ilo_xmlapi.pl --plugin=hardware::server::hp::ilo::xmlapi::plugin --mode=hardware --hostname='***' --username='supervisionilo' --password='***' --component='.*' --verbose