Skip to main content
Question

New LENOVO SR630 V4 and Centreon 26.10

  • Nov 17, 2026 2:28 PM UTC
  • 0 replies
  • 1 view

Hello

 

I’ve just upgrade my platform from Centreon 24.10 to 26.10

I have to supervise a pool of LENOVO SR630 V4 and I have issues for the disk and raid check.

 

The OID to check disk is hard coded into the lenovo-xcc plugin.

If I use the plugin on a SR630, I’ve got the good result : 

/usr/lib/centreon/plugins/centreon_lenovo_xcc_snmp.pl --plugin=hardware::server::lenovo::xcc::snmp::plugin --mode=hardware --hostname= www.xxx.yyy.2 --snmp-version=3 --snmp-force-getnext --snmp-username=USERID --component=disk --no-component=OK --debug

OK: All 5 components are ok [5/5 disk]. | 'count_disk'=5;;;;

snmp request: [1] snmpwalk -v3 -r5 -t1 www.xxx.yyy.2 -uUSER -lnoAuthNoPriv -On .1.3.6.1.4.1.19046.11.1.1.12.2.1

.1.3.6.1.4.1.19046.11.1.1.12.2.1.1.0 = 0

.1.3.6.1.4.1.19046.11.1.1.12.2.1.1.1 = 1

.1.3.6.1.4.1.19046.11.1.1.12.2.1.1.2 = 2

.1.3.6.1.4.1.19046.11.1.1.12.2.1.1.26 = 26

.1.3.6.1.4.1.19046.11.1.1.12.2.1.1.27 = 27

.1.3.6.1.4.1.19046.11.1.1.12.2.1.2.0 = Drive 0

.1.3.6.1.4.1.19046.11.1.1.12.2.1.2.1 = Drive 1

.1.3.6.1.4.1.19046.11.1.1.12.2.1.2.2 = Drive 2

.1.3.6.1.4.1.19046.11.1.1.12.2.1.2.26 = M2 Drive 0

.1.3.6.1.4.1.19046.11.1.1.12.2.1.2.27 = M2 Drive 1

.1.3.6.1.4.1.19046.11.1.1.12.2.1.3.0 = Normal

.1.3.6.1.4.1.19046.11.1.1.12.2.1.3.1 = Normal

.1.3.6.1.4.1.19046.11.1.1.12.2.1.3.2 = Normal

.1.3.6.1.4.1.19046.11.1.1.12.2.1.3.26 = Normal

.1.3.6.1.4.1.19046.11.1.1.12.2.1.3.27 = Normal

Checking disks

disk 'Drive 0' status is Normal [instance: 0].

disk 'Drive 1' status is Normal [instance: 1].

disk 'Drive 2' status is Normal [instance: 2].

disk 'M2 Drive 0' status is Normal [instance: 26].

disk 'M2 Drive 1' status is Normal [instance: 27].

 

But for a SR630 V4, the same plugin had no result : 

/usr/lib/centreon/plugins/centreon_lenovo_xcc_snmp.pl --plugin=hardware::server::lenovo::xcc::snmp::plugin --mode=hardware --hostname=www.xxx.yyy.1 --snmp-version=3 --snmp-force-getnext --snmp-username=USERID --component=disk --no-component=OK --debug

OK: All 0 components are ok []. - No components are checked.

snmp request: [1] snmpwalk -v3 -r5 -t1 www.xxx.yyy.1 -lnoAuthNoPriv -uUSER -On .1.3.6.1.4.1.19046.11.1.1.12.2.1

Checking disks

I add the --no-component=OK argument, because if not, all the result from this command are in CRITICAL status

After check, a SR630 use XCC (XClarity Controller) and a SR630 V4 use XCC3 (XClarity Controller V3) and in XCC3, the OID for Disk is not .1.3.6.1.4.1.19046.11.1.1.12.2.1 anymore, but .1.3.6.1.4.1.19046.11.1.1.15.2.1

And as the OID is hard coded into the plugin, we can’t have a result

Do you know if there is a solution to have the result for Disk and Raid Volume for SR630 V4 ?