Hello,
@Cm123 Here it is:
```
@Cm123 my poller is the one with id ‘5’
@Cm123 that was debug mode, as for error mode it’s this
2025-05-28 14:34:25
Hello,
autodiscovery module license is not valid
This means the Autodiscovery module is not licensed or the license has expired.
Fix:
Go to Centreon Web UI:
If you don’t have a valid commercial license:
Restart Services
Make sure the following services are restarted on both Central and Poller after the config changes.
On Central:
On Poller:
Re-deploy Config via Centreon UI
Go to Configuration > Pollers > Pollers Configuration
Select the poller and click Export Configuration
Then click Restart Monitoring Engine
Hello,there are no errors or critical issues reported. Everything appears to be functioning normally.grep -i cbmod.so /var/log/centreon-engine/centengine.log
Check poller-broker.json
On the poller , please check the file:
/etc/centreon-broker/poller-broker.json
Look inside for this output section (or similar):
{ "name": "central-module-master-output",
"type": "ipv4",
"protocol": "tcp",
"host": "10.99.8.118",
"port": 5669}
On the Poller Run the following in this order :
systemctl restart cbd
On the Central Server Run the following in this order :
systemctl restart cbd
Check for log again if any change?
@Cm123 Hello, After checking again on the central server the centengine.log command I get:
and as for the /etc/centreon-broker/pollersalle4-module.json file I see this:
It seems that the protocol is bbdo not tcp? is that what’s wrong?
Ive restarted the services but “cbd” doesnt exist in the poller, also I see no new different logs, same as old ones
@Cm123 Hello, After checking again on the central server the centengine.log command I get:
and as for the /etc/centreon-broker/pollersalle4-module.json file I see this:
It seems that the protocol is bbdo not tcp? is that what’s wrong?
Ive restarted the services but “cbd” doesnt exist in the poller, also I see no new different logs, same as old ones
@Cm123 No I didn’t change it but I noticed now that it changes on it’s own? whenever I correct it and restart the gorgoned centengine services it goes back to being 998 it should be 99.8, corrected it twice and restarted, changes on its own?
Thanks It worked @Cm123 but Ive also removed and reattached the poller but its finally up
Thanks It worked @Cm123 but Ive also removed and reattached the poller but its finally up
Welcome, Please feel free to contact if any.
