I used SNMP trap to monitor the status of switch interface and I observed weird behavior of SNMP trap notification. When the last SNMP trap was in OK state then the next OK state event for another interface was never triggered the alert. I saw that the SNMP trap message output was changed on Centreon monitoring portal but alert was not sent. Please help to advise me what could be the issue. Thanks so much!
Missing SNMP Trap notification of OK state event
Hi
![First Reply Badge](https://uploads-eu-west-1.insided.com/centreon-en/attachment/3b9ab69b-8207-479d-8943-3a76a239f643_thumb.png)
Hi
I have tried “Is Volatile” option but that is only sent alert when the last and the next trap event are in Non-OK state. If the last and the next trap event are in OK state then the trap event for another interface was not triggered the alert. I am not sure if Centreon DSM can be used to resolve this issue please advise me. Thanks
With Centreon DSM, you will have a “slot” per network interface.
So if you have 2 linkdown traps on 2 different network interface, you will have 2 different alerts.
When you will receive a linkup from a linkdown, this will recover the first alert and you will keep second alert. Then when you will receive the linkup for the second interface, you will see the change.
If you enable notification for the “generic-service-passive-custom” service template uses for the “slot”, you will receive all notifications
![First Reply Badge](https://uploads-eu-west-1.insided.com/centreon-en/attachment/3b9ab69b-8207-479d-8943-3a76a239f643_thumb.png)
With Centreon DSM, you will have a “slot” per network interface.
So if you have 2 linkdown traps on 2 different network interface, you will have 2 different alerts.
When you will receive a linkup from a linkdown, this will recover the first alert and you will keep second alert. Then when you will receive the linkup for the second interface, you will see the change.
If you enable notification for the “generic-service-passive-custom” service template uses for the “slot”, you will receive all notifications
Hi Laurent, Thanks so much for your time. I tried Centreon DSM and let you know the result.
![Five Replies Badge](https://uploads-eu-west-1.insided.com/centreon-en/attachment/be20f81f-427a-4abd-a5fa-8f548a2140b9_thumb.png)
Hi
I have the same problem as yours, did you manage to receive one ok trap after another?
I don’t understand why ‘is volatil’ only works with non-ok traps, when working with snmp alarm traps normally I need all your traps to be managed, not only non-ok state ones.
I achieved logging 2 ok state traps one after another activeting the ok stalking option in Data processing tab. But this only logs as documentation says, does not notificate.
Thank you in advance,
Sandra
Hi, ‘is volatil’ is an option to send notification, only for non-ok status, is status change or if output of the plugin change.
But for OK status, only one notification is sent.
If you want to send a notification for several OK received, you need to use Centreon DSM & slots.
Regards,
![Five Replies Badge](https://uploads-eu-west-1.insided.com/centreon-en/attachment/be20f81f-427a-4abd-a5fa-8f548a2140b9_thumb.png)
Thank you
![Five Replies Badge](https://uploads-eu-west-1.insided.com/centreon-en/attachment/be20f81f-427a-4abd-a5fa-8f548a2140b9_thumb.png)
Hi
We’ve tried to set up Centreon DSM in a test environment that we have but it was unsuccessful. As we activate the passive-pool, we missed the traps that enter normally without assigning it to a slot, and the ones redirected to the slots never arrived either.
We followed the instructions in centreon documentation but it never worked. Is there another place where we can find some examples or more information about the use of DSM Centreon. We are interested, as we have configured all our alarms, but there is still some traps that we are not seeing as we want, and ones crush others that have not reach an ok status.
Thanks
Hi
You need to configure the SNMP traps definition to execute DSM binary (execute special command) and select correct traps value for the “-i” option.
You need also to create the ALARM_ID custom macro on this host (or on a host template used by this host).
Then generate & export the configuration.
You can enable debug of centreontrapd processus (/etc/sysconfig/centreontrapd) to check if this process execute the special command and how.
Then you can enable DSM debug (/etc/sysconfig/dsmd)
Reply
Login to the community
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.