Hi !

Could you provide us the views defined in /etc/snmp/snmpd.conf ?

bash-4.2$ sudo cat /etc/snmpdv3.conf
# @(#)88 1.8 src/tcpip/etc/snmpdv3.conf, snmp, tcpip61D, d2007_49A2 10/3/07 15:19:01
# IBM_PROLOG_BEGIN_TAG
# This is an automatically generated prolog.

# tcpip61D src/tcpip/etc/snmpdv3.conf 1.8

# Licensed Materials - Property of IBM

# Restricted Materials of IBM

# COPYRIGHT International Business Machines Corp. 2002,2007
# All Rights Reserved

# US Government Users Restricted Rights - Use, duplication or
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

# IBM_PROLOG_END_TAG
#-------------------------------------------------------------------------------------------
#---------------------------------------------------------------
# General syntax rules about the snmpdv3.conf file:
# An entry must be contained on one line (i.e., the newline character will
# be treated as the end of an entry)
# All of the entry definitions require that all fields on the entry are
# specified, either with a specific value or a dash (-) to denote the
# default value.
# If an error is detected processing an entry and no appropriate default
# value can be assumed, the entry will be discarded.
# Statements in the file are not order-dependent. However if more than one
# DEFAULT_SECURITY statement is found, the last one in the file is the one
# that is used.
# Comments may be entered in the snmpdv3.conf file, with the following
# restrictions:
# Comments must begin with the pound sign (#) or asterisk (*).
# Comments must begin in column 1; this allows the pound sign and asterisk
# to be used in names of users, views, etc.
#-------------------------------------------------------------------------------------------
#---------------------------------------------------------------
#-------------------------------------------------------------------------------------------
#---------------------------------------------------------------
# USM_USER entries
# Defines a user for the User-based Security Model (USM).
# Format is:
# userName engineID authProto authKey privProto privKey keyType storageType

#-------------------------------------------------------------------------------------------
#---------------------------------------------------------------
#-------------------------------------------------------------------------------------------
#---------------------------------------------------------------
# VACM_GROUP entries
# Defines a security group (made up of users or communities)
# for the View-based Access Control Model (VACM).
# Format is:
# groupName securityModel securityName storageType
#-------------------------------------------------------------------------------------------
#---------------------------------------------------------------
#-------------------------------------------------------------------------------------------
#---------------------------------------------------------------
# VACM_VIEW entries
# Defines a particular set of MIB data, called a view, for the
# View-based Access Control Model.
# Format is:
# viewName viewSubtree viewMask viewType storageType
#-------------------------------------------------------------------------------------------
#---------------------------------------------------------------
#-------------------------------------------------------------------------------------------
#---------------------------------------------------------------
# VACM_ACCESS entries
# Identifies the access permitted to different security groups
# for the View-based Access Control Model.
# Format is:
# groupName contextPrefix contextMatch securityLevel securityModel readView writeView
#notifyView storageType
#-------------------------------------------------------------------------------------------
#-------------------------------------------------------------------------------------------
# NOTIFY entries
# Identifies management targets to receive notifications.
# Format is:
# notifyName tag type storageType
#-------------------------------------------------------------------------------------------
#-------------------------------------------------------------------------------------------
# TARGET_ADDRESS
# Defines a management application's address and parameters
# to be used in sending notifications.
# Format is:
# targetAddrName tDomain tAddress tagList targetParams timeout retryCount storageType
#-------------------------------------------------------------------------------------------
#-------------------------------------------------------------------------------------------
# TARGET_PARAMETERS
# Defines the message processing and security parameters
# to be used in sending notifications to a particular management target.
# Format is:
# paramsName mpModel securityModel securityName securityLevel storageType
#-------------------------------------------------------------------------------------------
#-------------------------------------------------------------------------------------------
# COMMUNITY
# Defines a community for community-based security.
# Format is:
# communityName securityName securityLevel netAddr netMask storageType
#-------------------------------------------------------------------------------------------
#-------------------------------------------------------------------------------------------
# DEFAULT_SECURITY
# Identifies the default security posture to be configured for the SNMP agent;
# additional security definitions defined by the use of the preceding eight entry
# definition types augment any default security configurations defined
# as a result of the DEFAULT_SECURITY statement.
# Format is:
# securityPosture password privacy
#-------------------------------------------------------------------------------------------
#-------------------------------------------------------------------------------------------
# logging file=</path/filename> enabled|disabled
# logging size=<limit> level=<debug level>

# where </path/filename> specifies the complete path and filename of the
# log file, enabled turns logging on, disabled turns logging off, <limit>
# specifies the maximum size in bytes of the specified logfile, and
# <debug level> specifies the logging level of 0, 1, 2, 3, or 4.
# The size default is 100000, and the level default is 0.
# There can be no white spaces around the "=" in the file, size and level fields.
# There are no restrictions on the order in which the fields are entered in the
# logging entries. A logging entry can contain single or multiple fields.
#-------------------------------------------------------------------------------------------
#-------------------------------------------------------------------------------------------
# smux <client OIdentifier> <password> <address> <netmask>

# where <client OIdentifier> is the unique object identifer in dotted
# decimal notation of the SMUX peer client. <password> specifies the
# password that snmpd requires from the SMUX peer client to authenticate
# the SMUX association. <address> is either the hostname, or an IPv4 address
# in dotted notation of the host, or an IPv6 address on which the SMUX peer
# client is executing.
# <netmask> specifies the network mask for IPv4 address, or a prefix length for
# IPv6 address. If no password is specified, there is no authentication for the
# SMUX association. The default address and netmask are 127.0.0.1 and 255.255.255.255.
# If neither the address nor netmask are specified, the SMUX association
# is limited to the local host. Fields to the right of
# <client OIdentifier> are optional, with the limitation that no fields
# to the left of a specified field are omitted.
#-------------------------------------------------------------------------------------------
#-------------------------------------------------------------------------------------------
VACM_GROUP group1 SNMPv1 XXXXX -
VACM_VIEW defaultView internet - included -
VACM_VIEW defaultView 1.3.6.1.4.1.2.2.1.1.1.0 - included -
VACM_VIEW defaultView 1.3.6.1.4.1.2.6.191.1.6 - included -
# exclude snmpv3 related MIBs from the default view
VACM_VIEW defaultView snmpModules - excluded -
VACM_VIEW defaultView 1.3.6.1.6.3.1.1.4 - included -
VACM_VIEW defaultView 1.3.6.1.6.3.1.1.5 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.3.8.1 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.3.8.1.2 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.3.8.1.3 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.5 - included -
# exclude aixmibd managed MIBs from the default view
VACM_VIEW defaultView 1.3.6.1.4.1.2.6.191 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.3.1 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.3.1.2 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.3.1.1 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.3.1.3 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.3.1.5 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.3.1.6 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.3.1.4 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.1.1 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.1.2 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.1.3 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.1.4 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.1.5 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.1.6 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.1.7 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.1.8 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.1.9 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.2.1.10 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.4.2.1 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.4.2.1.1 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.4.2.1.2 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.4.2.1.4 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.4.2.1.5 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.5.1.1.2 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.5.1.1.1 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.4.2.1.7 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.3.3.1 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.3.3.1.1 - included -
VACM_VIEW defaultView 1.3.6.1.2.1.25.3.3.1.2 - included -
VACM_ACCESS group1 - - noAuthNoPriv SNMPv1 defaultView - defaultView -
NOTIFY notify1 traptag trap -
TARGET_ADDRESS Target1 UDP 127.0.0.1 traptag trapparms1 - - -
TARGET_PARAMETERS trapparms1 SNMPv1 SNMPv1 XXXXX noAuthNoPriv -
COMMUNITY XXXXX XXXXX noAuthNoPriv 0.0.0.0 0.0.0.0 -
DEFAULT_SECURITY no-access - -
logging file=/usr/tmp/snmpdv3.log enabled
logging size=100000 level=0
smux 1.3.6.1.4.1.2.3.1.2.1.2 gated_password # gated
VACM_GROUP director_group SNMPv2c XXXXX -
VACM_ACCESS director_group - - noAuthNoPriv SNMPv2c defaultView - defaultView -

@kduret  we also tried adding includeAllDisks 10% and disk /finusers in conf file

but it doesnt work log file says

 snmpd: 1473-148 Line number 193 contains an unsupported keyword : includeAllDisks.

snmpd: 1473-148 Line number 194 contains an unsupported keyword : disk=/finusers