Skip to main content

    Filter by idea status

    Filter by product

    629 Ideas

    E
    elmarsieversSteward *

    Acknowledgements with possibility to set end datesDeclined

    We have some messages that we eliminate via an automatic restart during the night (e.g. C disks with warning, SWAP messages).If we work with acknowledgements and the problem has not been solved overnight, the alarm remains permanently acknowledged and we lose sight of this alarm.If we work with a downtime until the next morning at 05:00 (which we currently do), we do not notice if the C disk switches from Warning to Critical by then and may prevent users from continuing to work.

    4
    E
    Forum|Forum|8 months ago
    M
    MoyoSteward **

    Create a PaloAlto ION SDWAN pluginNeeds Votes

    Hello,I’m installing my new SDWAN solution (PaloAlto ION SDWAN) and we can check it with SNMP and API. I worked on the SNMP part and will do it on the API part.I think a new official plugin for that solution can be very interesting for lot of people.So the good information should be : - CPU (SNMP) - Memory (SNMP) - Interface status (SNMP) - VPN tunnels status (API) - HA Status (API) - Prisma SDWAN Status (bandwidth consomption for example) (API)Where can I put the MIB and snmpwalk to help ?Thanks by advance

    6
    M
    Forum|Forum|8 months ago
    H
    Horst KitschSteward **

    graph: fill the area between two linesNeeds Votes

    Hi, we are monitoring the reliability of WAN lines. We have a check, which measures the round-trip-time to a remote site and giving back the min, avg and max RTT.I’d like to have a graph, which draws the avg as a solid line (that’s easy) and I want to have the area between the min and max filled with a colour. For those, who know smokeping, I like this kind of display a lot!Maybe there are other use-cases, where a filled area between two metrics might be useful !?Would it be possible to fill the max metric as usual and restore background colour (erase the filling of the max) with the min metric?

    3
    H
    Forum|Forum|9 months ago
    G
    gregorySteward ***

    New connector (plugin pack) for podmanReleased

    Hi,There is a docker connector, can make a connector for podman (which looks a lot like Docker).Best regards,

    14
    ltirand
    Forum|Forum|9 months ago
    FredericGerard
    FredericGerardSteward **

    Dashboard : owner managementDeclined

    Hi,Persona : adminsProblem to solve : It is not possible to reassign the owner of a dashboard. If this person leaves the company, it should be possible to assign their dashboards to another user.Expected outcome : Allow Centreon Admins to reassign the owner through the Dashboards forms.Potential solution : Add functionnality in the 3 dots menu of a dashboard. Regards

    5
    FredericGerard
    Forum|Forum|9 months ago
    marc
    marcSteward *

    From Monitoring to Predicting: Adding Latency Intelligence to CentreonDeclined

    Today, Centreon users can monitor latency and throughput in real time via the Latencetech REST API plugin pack.The next step could be to move from reactive monitoring to proactive prediction.The idea is to create a “Latency Intelligence” layer inside Centreon that leverages Latencetech’s fine-grained metrics (latency, jitter, stability, volatility) to forecast degradations before incidents occur.By correlating these indicators with Centreon Business Activity Monitoring (BAM) views, users could anticipate SLA drifts and understand how network instability impacts service performance.Predictive alerts (“latency drift alerts”), QoE dashboards, and latency trend analytics would help network and IT teams reduce downtime, prevent service degradation, and enhance user experience.This innovation would position Centreon as a truly predictive observability platform, bridging technical and business perspectives — and turning monitoring into insight.

    2
    rchauvel
    Forum|Forum|9 months ago
    FredericGerard
    FredericGerardSteward **

    Dashboard : enrich search barNeeds Votes

    Hi,Persona : Admins and OpsProblem to solve : With a large number of dashboards, searching could be simplified with more sorting criteria.Expected outcome : Enhance search bar with criteria about owning and sharing.Potential solution : Redesign the search bar to add two criteria:1- Drop down list “Owners” (feature for administrators) : all dashboards owners2- Drop down list “Sharing” (feature for anyone) : “My dashboards” or “Dashboards shared with me”Regards 🙂

    3
    rchauvel
    Forum|Forum|9 months ago
    J
    jonathan.godinSteward *

    Icons Note_URL and Action_URL in widget Resources_Table for the DashboardPlanned

    Hi,In the widgets “Host Monitoring” or “Service Monitoring” for the Custom Views, we have icons for the links in Note_URL et Action_URL.In widget Resources_Table for the Dashboard, we don’t have these icons, however in my organisation we use its for the troubleshooting.Can theses icons be added in the widget Resources_Table ?Thanks

    2
    P
    Forum|Forum|9 months ago
    YannHANQUART
    YannHANQUARTSteward *

    [Resource Status] Viewing Notes in details panelNeeds Votes

    When adding a note about a service, it would be nice to be able to view this information in Supervision > Resource Status. When you click on the service, you get the service detail banner.

    5
    C
    Forum|Forum|9 months ago
    N
    nicosigSteward *

    view by host paginationIn Backlog

    Hello,On Resource status page with the “view by host” :Pagination is based on services and not on hosts, so sometimes we have two lines when paginating to 100, including in tree view.->The idea is to base pagination on visible lines (host)Thanks

    1
    rchauvel
    Forum|Forum|9 months ago
    FredericGerard
    FredericGerardSteward **

    MAP : automatically draw the immediate network neigboroughood of a hostNeeds Votes

    Hi,Persona : admin or people in charge of setting maps upProblem to solve : In the MAP module, adding host's network neighbourhood and the links/ports that connect them is a repetitive and time-consuming task.Expected outcome : Within the scope of network supervision, the aim would be to automatically map the equipment connected to the host. Potential solution :Provided that the LLDP (or CDP) protocol is active on the network, the MIB of the specified host contains the necessary information. The retrieved list must then be compared with the list of hosts declared in Centreon, and the MAP could be constructed from the join of the two. To avoid the risk of duplication, we would limit ourselves to the host's immediate neighbours.Regards.

    1
    rchauvel
    Forum|Forum|9 months ago
    I
    ibonSteward *

    Monitoring batery in Fujitsu DXNeeds Votes

    The Fujitsu Eternus DX cionnector does not check battery state.We have a DX 60 customer cabin with dead batteries.In Centreon, in the DX plugin, I don't see the option to monitor the batteries.How do I monitor them, given that there is one for UPS, but this is a DX cabin, not a UPS?

    3
    rchauvel
    Forum|Forum|9 months ago
    H
    Horst KitschSteward **

    generic SNMP check: need --format-custom in --config-json modeNeeds Votes

    I need to monitor several values, which I want to have in a single graph.Unfortuantely, I need to do some math on each value (/10 for some and /100 for others).When I grab a single oid, I can do that with --format-custom. But in --config-json mode, format-custom does not do anything.Can these options be added to the --config-json mode?BRHorst

    1
    rchauvel
    Forum|Forum|9 months ago
    sdouce
    sdouceBuilder **

    UI suggestion – Hover menus overlap form elements and make editing difficultNeeds Votes

    Hi Centreon team,I’ve noticed a small but annoying UI issue in the web interface. When you hover the mouse over the left-side menus, the dropdown overlays the buttons or fields I’m trying to click or edit (see screenshot attached).This makes the user experience quite frustrating, especially when configuring pollers or exporting configurations.Would it be possible to add an option in the UI settings to switch between hover (overmouse) and onclick behavior for opening the side menus?Thanks for considering this improvement — it would make navigation much smoother!Best regards,Sébastien

    1
    rchauvel
    Forum|Forum|9 months ago
    M
    martin.szabo.opmobilitySteward *

    Escalation, Graph configuration, discovery missing API endpointNeeds Votes

    Hello, I was going through Centreon’s CLI, RESTv1 and RESTv2 APIs and found that Escalations object management is completely missing from all APIs. Right now I am performing a migration to new Centroen Central (with clean DB, importing config via CLAPI). And I have to recreate 500+ escalations by hand. API endpoint would be really helpful in this case. Would it be possible to develop this feature in newer version of Centreon? Best regards,Martin Szabo

    10
    lpinsivy
    Forum|Forum|9 months ago
    S
    SavCentBuilder **

    UI improvment - possibility to show only hard alert for UI NotificationsDeclined

    actually the Ui Notifications ccould be activated for those alerts But it will be very cool to show only the hard one. Don’t you thinks ?

    5
    rchauvel
    Forum|Forum|10 months ago
    cmeschin
    Centreonian
    cmeschinCentreonian

    Resource status - Display the icon of host (parent)Needs Votes

    Some customers uses the icon of host to define if a ticket is requested all the time (24x7) or only on workhours.In this case, it could be useful to display this icon on the parent resource.Either in place of the status icon (not very relevant)(4) or next to the status icon (1), or in a separate “parent icon” column (2) as for notes, graphs, or actions, or even in the “parent alias” column (3), which can be activated as needed.Thanks.

    9
    rchauvel
    Forum|Forum|10 months ago
    L
    Launay StéphaneSteward *

    [DASHBOARDS] - Widget Metrics graph - Show last value above chartNeeds Votes

    Having the option to display or not the last value above the graph is to make it change color depending on the status.This is currently possible by placing two widgets "Single metric" and "Metrics graph" on top of each other instead of just one. 

    1
    rchauvel
    Forum|Forum|10 months ago
    Marc GUEPY
    Marc GUEPY

    Search on Administration > LogsNeeds Votes

    Search on Administration log is done on the object name only.Example: We have a host name SWITCH-MYTOWN-01 with a lot of services, some with string “MYTOWN” on there names other no.If we done search “Object=SWITCH-MYTOWN-01 Object Type = All” we only have results concerning actions done on host SWITCH-MYTOWN-01. However if we done this search “Object=MYTOWN Object Type = All” we get results s on all type of objects with MYDOWN on their names.So we are not able to get all actions done on ALL services for a specific host.Do yu think it’s possible to implement a way to do a search on Adminsitarion > Logs to find all actions related to a host and its services ? Marc.G 

    1
    rchauvel
    Forum|Forum|10 months ago
    I
    ines hmaidiSteward ***

    centreon 24.10 avec nagvisDeclined

    Bonjour any solution for that  

    2
    rchauvel
    Forum|Forum|10 months ago
    M
    mikailSteward **

    Custom host autodiscoveryNeeds Votes

    Hello,Is it possible to make host autodiscovery more modular, just like service autodiscovery ? So we can use custom commands with custom scripts and integrate new hosts with in the XML format. Currently, the host autodiscovery is only based on plugins for specific types of machine.Thank you in advance.

    1
    rchauvel
    Forum|Forum|10 months ago
    FredericGerard
    FredericGerardSteward **

    Dashboard : event log widgetNeeds Votes

    Hi,Persona: operatorsProblem to solve: no widget to list or summarize summarize events. Such a widget would be useful to provide to operators a “single plane of glass” dashboard with current KPI’s status and a summary of recent events.Expected outcome: a widget which takes as input : a scope which can be filtered : services or hosts or servicegroup or hostgroup a timespan : last x hours state and status (by default all)and displays at least the number of events.Potential solutions: probably a new widgetRegards 🙂

    1
    rchauvel
    Forum|Forum|10 months ago
    M
    mikailSteward **

    Possibility to delete services not found by autodiscovery instead of disabling themNeeds Votes

    Hello,Is this possible to add a feature to delete the services not found by autodiscovery while initially created by it ? Basically, this option below in the autodiscovery rules with delete instead of disable.As we have a several rules and a service can change rule perimeter, if it is disabled by its previous rule, it won’t be added by the new one as it is already existing in the configuration. Besides having a clearer configuration.Thank you in advance.

    5
    rchauvel
    Forum|Forum|10 months ago
    N
    nicosigSteward *

    CMA Token is stored in clear in registryIn Backlog

    In the server registry with Windows CMA, the token is unencrypted. In the case of a terminal server, the token is visible to all users, which is a problem. Furthermore, it is stored in keys that are accessible to everyone.

    1
    rchauvel
    Forum|Forum|10 months ago
    xsamson
    xsamsonSteward *

    Dashboard widget - Group MonitoringNeeds Votes

    Bonjour à tous, Est il possible de masquer les status des hosts et services pour lesquels la valeur est à 0, comme c’était le cas dans les custom view ?En l’état actuel ça ne permet pas d’avoir une idée directe pour savoir si tout va bien ou pas et de plus ça surcharge l’affichage pour rien. 

    1
    rchauvel
    Forum|Forum|10 months ago

    Filter by product

    • All products
    • Centreon Infra Monitoring
    • Centreon DEM
      Terms & ConditionsAccessibility statement