Infra Monitoring Data collection

Hi, I am migrating my monitoring configuration from NagiosCore and NagiosQL to Centreon, but I have a problem with the service templates with which I am quite desperate.Unlike with host templates (which you can add more than one template per host) in services, Centreon only lets you add one template.I have already seen that in Centreon this works using inheritance, but is there any other way to make it work by groups?As I said, I currently add to each service several templates which have an order that matters.I have a problem since for each line you see in the image below (these are all the possible combinations in my monitoring), I would have to create a lot of different "routes" duplicating templates.Let's see if I explain better with an example...If I want my template A to follow the following inheritance, A->B->C->D but then I want another service to follow the following inheritance A->E->C->D, with the Centreon inheritance system, I understand that I should creat

Hello,I am in Centreon 22.04 version.I deleted a host and restarted my poller but it is still present in my console.Moreover, the addition of host works but does not appear in my monitoring console.Thanks for your help.Steve

Hi, I am migrating configuration files from Nagios to Centreon using the CLAPI.Several directories have been created in /var/cache/centreon/config/engine/X what is the utility of these directories? What about the meta_xxxx.cfg files?

I need to monitor harddrive / storage  status. How is it done with “HP Ilo Rest API” plugin?The new Proliant Gen10 servers have MR Raid instead of Smart Array controller and my old iLO monitoring command “check_ilo2_health.pl” does not show the storage information.I verified with “HPE iLORest utility” that information is accessible by RestAPI for example by commandsselect Driveget 

Bonjour,Je ne parviens pas a faire découvrir tous les ports d’un switch générique.quelle sont les manupulation a effectuer pour que tous les ports soient détecté automatiquement ?nous-chr

Hello,I have just updated the "Microsoft SQL Server" plug-in packSince then, using the "App-DB-MSSQL-Connected-Users-custom" template the following error comes up: "UNKNOWN: Can't call method "fetchrow_array" on an undefined value at /usr/lib/centreon/plugins//centreon_mssql.pl line 11520"Same for the "App-DB-MSSQL-Deadlocks-custom" template the following error comes up:"UNKNOWN: Can't call method "fetchall_arrayref" on an undefined value at /usr/lib/centreon/plugins//centreon_mssql.pl line 12047."I would like to point out that before the update, everything was working normally.Thanks in advance for your feedback 

Bonjour,Nous avons usage du plugin QNAP pour la première fois mais rencontrons 2 problèmes :L’unité associé au service supervisant usage de la capacité mémoire est le GB, or nos remontés ont pour unité réel le TB/To=> Où pourrions-nous modifier cette unité associé par défaut ? Le service Hardware-Global qui a pour option --component='.*' semble nécessiter connaîte la MIB- Ai-je raison ? Il est en état   UNKNOWN   :=> Pourquoi n’arrive-t-il pas à trouver l’arborescence de la MIB ? => Comment le lui indiquer ?Merci d’avance pour vos retours,  FM

Bonjour,Nous avons une vue contenant le widget Hostgroup Monitoring et contenant les colonnes suivantes :Host Name - Host Alias Status Duration Status Information Comment Lors de l’export des données présentées par la vue, les commentaires ne sont pas repportés dans l’export - la colonne est vide. Nous sommes en version 21.10 et il s’agit dun défaut déjà remonté.Auriez-vous un patch ou un process de troubleshooting pour ce défaut ?Merci par avance de votre retour;  FM

Hello,When upgrading to centreon 20.10 (from an old 2.4.4), i noticed that check_nrpe (4.0.0) wasn’t compatible with older Linux OS having older nrpe clients.So i kept using the check_nrpe from the previous centreon and it works well.Now, i am looking to update to centreon 22.10 but i know i will have the same issue.The backward compatible options aren’t working.The error is still “CHECK_NRPE: (ssl_err != 5) Error - Could not complete SSL handshake wit <IP>” and here’s the log from a nrpe client 2.15 with debug on :nrpe[4852]: Connection from 10.5.236.21 port 2742nrpe[4852]: Host address is in allowed_hostsnrpe[4852]: Handling the connection...nrpe[4852]: Error: Could not complete SSL handshake. 1nrpe[4852]: Connection from ⚌⚌#027q closed Here’s was i have tested so far : (check_nrpe 4.1.0 was compiled from sources)check_nrpe from versions 4.*, when not working with older nrpe client, were tried with various options as -2, -3 & -L ALLHow are we supposed to monitor old OS with

Hello everyone, For my company i need to count a number of specific process running on a system and get an alert on my centreon dashboard if that number is superior than N. I really apreciate if you have any solution or suggestion. Regards. 

Hello TeamI am configuring monitoring for ESXi and VCenter servers. I have a problem with one environment where  is vcenter in version 7.0 and esxi in version 6.5 and 7.0. Is VCenter 7.0 compatible with centreon 22.04 and it should work? i get error : UNKNOWN: Cannot get response (timeout received). With the other vcenter in version 6.5 i had no such problem.

Hello,Mon host est associé à un poller différent du poller central.La commande de discovery manuelle est exécutée sur le poller central.Le flux snmp n’étant pas ouvert entre le poller central et le serveur à intérroger, la découverte ne fonctionne pas.Y-a-t’il un moyen que la commande de découverte parte du poller où est déclaré le host à monitorer ?Ma plateforme est en version : 22.04.7.Cordialement

Hello I get an error when I want to retrieve the rsa public key [root@poller-1 tmp]# perl gorgone_key_thumbprint.plBareword found where operator expected at gorgone_key_thumbprint.pl line 9, near ""en" data"        (Missing operator before data?)Bareword found where operator expected at gorgone_key_thumbprint.pl line 9, near ""auto" data"        (Missing operator before data?)Bareword found where operator expected at gorgone_key_thumbprint.pl line 9, near ""light" data"        (Missing operator before data?)Bareword found where operator expected at gorgone_key_thumbprint.pl line 9, near ""dark" data"        (Missing operator before data?)Can't modify numeric lt (<) in scalar assignment at gorgone_key_thumbprint.pl line 9, near ""en" data"syntax error at gorgone_key_thumbprint.pl line 9, near ""en" data"Excessively long <> operator at gorgone_key_thumbprint.pl line 28.  OS centos 7perl v5.16.3centreon 22.04 Thanks for your help  

How do i filter out results retuned by the Watchguard plugin mode hardware to only show interface eth0 and eth1 and not eth2, eth3 or eth4 which are unplugged.command:/usr/lib/centreon/plugins//centreon_watchguard_snmp.pl --plugin=network::watchguard::snmp::plugin --mode=hardware --hostname=x.x.x.x --snmp-version='2c' --snmp-community='XXXX' --component='.*' --verbosereturns:CRITICAL: Device 'network interface eth2' status is 'down' - Device 'network interface eth3' status is 'down' - Device 'network interface eth4' status is 'down' | 'count_device'=10;;;;Checking devicesdevice '' status is 'running' [instance = processor.196608]device '' status is 'running' [instance = processor.196609]device '' status is 'running' [instance = processor.196610]device '' status is 'running' [instance = processor.196611]device 'network interface eth0' status is 'running' [instance = network.266240]device 'network interface eth1' status is 'running' [instance = network.266241]device 'network interface et

Hello everybody ,I have a question for you .How are calculated metrics in /var/lib/centreon/metrics  In my CENTRAL folder each files are 76K or 224K for some of them .But for my remote serveur , each file are 2.1M and my folder is full . I want to purge them , but they come over and over .How to purge really ? 

helloi m a error to monitoring my ESXi 6.5UNKNOWN: Cannot get response (timeout received)Esx-HealthEsx-MemoryEsx-CpuEsx-Vm-CountEsx-SwapEsx-Status centreon_vmware.pm  is OK (login-password) end start I also have this message in the logs but i don’t know if it has a link:'default' SOAP request error - possibly a protocol issue: Server closed connection without sending any data back at /usr/share/perl5/vendor_perl/Net/HTTP/Methods.pm line 373. 

Hello,I have a problem with my Centreon 21.04.4.If I install a new plug-in in my case Virt-VMWare2-ESX, the corresponding templates doesn’t appear in “Templates” in Host configuration.How can I troubleshoot this problem or rebuid the template list (in host configuration) ?Thank you and best regards,Evo

Hi,Centreon provides plugin for Elasticsearch and Graylog. Does Centreon plan a plugin for Splunk ?Thanks

Hello there,is there a way to monitor if a server needs an upgrade (MS Windows, Debian, CentOS, ...) with SNMP?Or the only solution is to install NRPE and check_update on each server?Thanks for your help

Hello, I am using an snmpget request to read an extend mib on a remote client, but the request fails.I have a timeout because the snmpget must read a .txt file which seems to be too long for it. (it works when I remove lines).Is there an option in snmpget to do an "auto-reduce" used in plugin packs? The commad is: snmpget -t 20 -v3 -u user -l authPriv -a SHA -A password -x AES -X password -Oqv NET-SNMP-EXTEND-MIB::nsExtendOutputFull.\InterfacesErrors\” thank you

Hello,  Why does the --http-backend=curl option work on some websites and not work on others?I have a website which work if --http-backend=curl is setI have a website which  work if I remove --http-backend=curl in centreon plugin CordialyFrancis

Hi everyone, how are you?I have a server centreon, and i want graph only interface traffic xgigabitethernet0/0/1, but it the command, show all interfaces that match the pattern “XGigabitEthernet0/0/1X”. How do filter this? only appear with the huawei switch.Thank you very much in advance, grettings to all  

Hello,I am using the same centreon plugin vmware command on two different pollers.One of them works.In the poller that works when I run the command: curl https://ipvcenter/sdk/vimService.wsdl -vvv -k I have a return that proves it works On poller not working when I run command: curl https://ipvcenter/sdk/vimService.wsdl -vvv -k I got error like: Initializing NSS with certpath: sql:/etc/pki/nssdb*   CAfile: /etc/pki/tls/certs/ca-bundle.crt  CApath: none* NSS error -5961 (PR_CONNECT_RESET_ERROR)* TCP connection reset by peer* Closing connection 0curl: (35) TCP connection reset by peer  What does that mean? while it was still working 2 weeks ago CordialyFrancis DOUNGA

Hello,How can I know who has disable notification on service from centreon interface > more action > service disable notification? CordialyFrancis

Hello,I want to monitor my D: partition on a Windows server. I use the 'OS-Windows-Disk-Generic-ID-SNMP' plugin and I set the DISKID value to 1. It is the C: drive that comes up.With the 'OS-Windows-Disk-Generic-Name-SNMP' plugin, I set the value D: for the DISKNAME option and it's still the C: drive that comes up.Could you help me ?Thanks in advanceSteve