Skip to main content

Centreon Forums

Learn more about the Centreon platform.

2404 Topics
V
vliardSteward **
asked in Data usage and Visualization
[DASHBOARD] --- Single Metrics values displays 0 (Centreon 24.04

Hello The Watch,I have a WSUS Dashboard that is supposed to show me various single metrics reported by NSClient++Below, we can see that the host's service values are correctly taken into account by the poller.OK: Computers Up-to-date: 242, Needing Updates: 12, With Update Errors: 0, Not Contacted: 261, Unassigned: 1 | 'computers_up_to_date'=242;;;0; 'computers_needing_updates'=12;;;0; 'computers_with_update_errors'=0;;;0; 'computers_not_contacted'=261;;;0; 'computers_unassigned'=1;;;0;But when I create the DashboardAll values are zero!An open case on the support side.Thanks for your help.Best regards,Vincent (Nantes Métropole)

672
V
G
glepinay
asked in Platform
Event log is emty !

Hello,We are used to checking the Event Log for services in Centreon (to see state changes, alerts, etc.).We have noticed that these events appear empty in the ‘EVENT LOG’ interface, regardless of the service consulted.This is happening since the last Upgrade (from  23.10.17 to  24.04.7).I tried to select only one host, or different services : or nothing : but the page remains EMPTY : If I select a time Range (Instead of LOG PERIOD) : same result.I found on thewatch multiple discussions on that subject … I tried to find some solutions … but could not find any solution.Any idea ? 

300
G
I
icircoSteward *
asked in Platform
centreon-engine : load path variable for user

hi, I use centreon-plugins for azure.When I run the plugin with centreon :UNKNOWN: Command error: sh: az: command not found I tried in command line with the user centreon-engine and it works. It works beacause the PATH is correctly setup but when centreon run the command it doesn’t load the profile… How to run the profile of centreon-engine for this type of plugin ?

413
I
gwendal.praud
gwendal.praudSteward *
asked in Platform
Problème avec centreontrapd

Bonjour,J’ai un souci actuellement avec centreontrapd : il prend trop de temps à s’exécuter.J’ai environ 3000 traps avec le même OID (et de même sur 3 autres OID), à cause de ça chaque trap met plus d’une minute à être traitée.Après analyse du code de centreontrapd, celui-ci recherche d’abord toutes les traps ayant l’OID parent de la trap envoyée (3000 dans mon cas), puis pour chacun des OID parent trouvé cherche l’hôte (3 à 5 ms avec une pointe à 50 ms) et le service associé et pour le service s’il n’est pas en downtime (12 à 20 ms avec une pointe à 90 ms).Si on compte la totalité : 3000 x (3 + 12) = 45 000 ms soit 45 s au minimum et 3000 x (5 + 20) = 75 000 ms soit 75 s mais peut durer encore plus longtemps.Mon problème est que je reçois entre 40 et 100 traps par minute et il est donc impossible pour centreontrapd de traiter tout ça ce qui fait que j’accumule les traps dans /var/spool/centreontrapd sans jamais pouvoir les résorber.Auriez-vous une solution pour résoudre ce problème s’

350
gwendal.praud
tsuko
tsukoBuilder **
asked in Platform
Autodiscovery Login Error "404"

Hi all ! Since somes days i got a problem in my gorgoned logs:- ERROR - [autodiscovery] -class- host discovery - cannot get platform versions - Login error [code: '404'] [message: 'Not Found'] Why did that return me this message in my Gorgoned logfile ?When i use the discovery mode that work fine so i’m curious to know why that appear..

130
tsuko
F
Francis DOUNGASteward **
asked in Data collection
Rebuild DWH db content doesn't work

Hello, I have this error on my DWH: [servicestateevents: 2022-07-20 02:50:39] [mod_bi_servicestateevents: 2022-07-20 02:50:38] I have imported data from 2022-07-20 to 2022-07-21 using  /usr/share/centreon-bi/etl/importData.pl -r -s 2022-07-20 -e 2022-07-21 --ignore-databin after I used /usr/share/centreon-bi/etl/eventStatisticsBuilder.pl -r -s 2022-07-20 -e 2022-07-21  --events-only. My jobs finished but the same error persiste. What is the problem? CordialyFrancis DOUNGA

43117
R
M
mozesSteward *
asked in Platform
remote to central

Bonjour,Visiblement je me suis trompé dans ma commande; lorsque j’ai voulu attacher mon remote mon central a perdu toute la partie configuration d’hôte. Je ne sais pas comment faire un rollback. Merci de votre aide

110
M
E
ElFabinouSteward *
asked in Platform
UNKNOWN : Need to specify OIDs

Hello, When I am trying to use Blocked-Packets-Per-Interface  feature on pfSense, I get the following error : UNKNOWN: Need to specify OIDs. Same when I try to launch the following command (from centreon documentation) :/usr/lib/centreon/plugins/centreon_pfsense.pl \ --plugin=apps::pfsense::snmp::plugin \ --mode=pfinterfaces \ --hostname='10.0.0.1' \ --snmp-version='2c' \ --snmp-community='my-snmp-community' \ --filter-name='em.*' \ --warning-traffic-in-block='80' \ --warning-traffic-out-block='90' \ --critical-traffic-in-block='80' \ --critical-traffic-out-block='90' \ --use-new-perfdata I activated my IT-100 license and installed pfSense plugin. Any idea of what could be the issue ? Thank you.

3894
C
Centreon Lord Commander
S
sebastien.chansonSteward *
asked in Data collection
Mongodb monitoring configuring a dedicated user

Hi,I try to use the mongodb plugin DocumentationI manage to connect to the mongodb and get data if I use a user with admin privilege.I tried to define a user with just the required rights as given in the documentation:    listDatabases    listCollections    collStats    serverStatus    dbStatsI have defined the following role:admin> db.getRole( "centreonMonitoring", { showPrivileges: true } ){ _id: 'admin.centreonMonitoring', role: 'centreonMonitoring', db: 'admin', privileges: [ { resource: { db: 'admin', collection: '' }, actions: [ 'collStats', 'dbStats', 'listCollections', 'listDatabases', 'serverStatus' ] }, { resource: { db: '', collection: '' }, actions: [ 'collStats', 'dbStats', 'listCollections', 'listDatabases', 'serverStatus' ] } ], roles: [], inheritedRoles: [], inheritedPrivileges: [ { resource: { db: 'admin', collection: '' }, actions: [

191
S
G
Gregory MAQUINSteward *
asked in Platform
BUG export config with plugin ESX after update 24.10.2 to 24.10.3

Hi,After update 24.10.2 to 24.10.3OS DEBIAN 12I have this message when export config:I chown www-data:www-data /etc/centreon/centreon_vmware.jsonexport config is ok.But now /etc/centreon/centreon_vmware.json is empty !!! and "UNKNOWN: Unknown container name"Any idea ?thx for help

582
G
M
medtemsSteward *
asked in Platform
probleme de interfacage de GLPI avec centreon

bonjour monsieur j'ai espère que vous avez bien je pense que vous avez des idée concerne interfaçage de GLPI avec centreon , Je cherche à configurer Interfacer Centreon/GLPI: je souhait continue sur deux approches:==> Revoir la configuration de l'API Open Tickets pour générer automatiquement les tickets au niveau de GLPI.==> En parallèle, une deuxième solution, envoyer les alertes vers l'adresse mail itsm@gmail.ma au niveau de GLPI, pour générer les tickets avec les informations de l'incident. le problème c’est sauf que a all époque si nous test une alert il ne pas générer un ticket est ce qui il ya quelque ici il est des idée concerne ce sujet merci d’avance ? 

350
M
R
Ronan LevigneronSteward *
asked in Platform
MySQL ERROR

Hi everyone,I have a problem in my configuration of centreon 23.10.In fact, every sunday, i have this error in gorgoned.log……………………………………………………………………...Log :2024-12-01 03:30:06 - ERROR - MySQL server has gone away2024-12-01 03:30:07 - ERROR - MySQL error : cannot connect to database 'mysql:host=localhost:3306;dbname=centreon': Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) (caller: gorgone::class::db:/usr/share/perl5/vendor_perl/gorgone/class/db.pm:339) (try: 0)2024-12-01 03:30:08 - ERROR - MySQL error : cannot connect to database 'mysql:host=localhost:3306;dbname=centreon': Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) (caller: gorgone::class::db:/usr/share/perl5/vendor_perl/gorgone/class/db.pm:339) (try: 1)2024-12-01 03:30:11 - ERROR - [engine] Cannot get Pollers configuration2024-12-01 03:30:11 - ERROR - [statistics] Receiving DIE: Can't use string ("-1") as a HASH ref while "strict refs" in use at /usr/share/p

820
R
B
benboulzSteward *
asked in Platform
network::cisco::standard::snmp::plugin : warning/critical speed

Hi all,I'd like to check the speed of a switch port and put thresholds (warning at 100Mbps and critical at 10Mbps)Here's the command line :Port 1 :perl centreon_plugins.pl --plugin=network::cisco::standard::snmp::plugin --mode=interfaces --add-speed --interface=10104 --hostname=10.100.0.11 --warning-speed=100000 --critical-speed=10000the ouput :CRITICAL: Interface 'Gi1/0/4' Speed : 1.00Gb/s | 'speed'=1000000000b/s;0:100000;0:10000;0;Port 2 :perl centreon_plugins.pl --plugin=network::cisco::standard::snmp::plugin --mode=interfaces --add-speed --interface=10119 --hostname=10.100.0.11 --warning-speed=100000 --critical-speed=10000the ouput :CRITICAL: Interface 'Gi1/0/19' Speed : 100.00Mb/s | 'speed'=100000000b/s;0:100000;0:10000;0;Not sure I understood the way it should workDo you have an example that works ?Many thanks for your answer 

472
B
O
omen86Steward *
asked in Platform
AUTODISCOVERY VM NOT WORKING

When i use auto discovery VM (vmware v8), i have this error in my gorgoned.log! do you have any idea please, 24.10.3 ERROR - [autodiscovery] -class- host discovery - cannot get platform versions - Login error [code: '401'][message: 'Unauthorized'] 

310
O
L
LAUPSteward *
asked in Data usage and Visualization
Request SQL

Hello,I would like to send a sql query to a database and get the value (using a select count etc...) I can do it from the 'command line' but from the web interface I am completely lostThanks for your help

5425
ponchoh
Centreonian
J
joviadoSteward *
asked in Platform
Error updating to 24.04.9

Hi, I have problem, a package is not installedEjecutando operación  Preparando          :                                                                                                                                    1/1  Ejecutando scriptlet: centreon-common-24.04.9-1.el9.noarch                                                                                               1/2Removing previous centreon engine and broker configuration files in cache ...Creating centreon user and group ...  Actualizando        : centreon-common-24.04.9-1.el9.noarch                                                                                               1/2Error unpacking rpm package centreon-common-24.04.9-1.el9.noarch  Verificando         : centreon-common-24.04.9-1.el9.noarch                                                                                               1/2  Verificando         : centreon-common-24.04.5-1.el9.noarch                                                                 

292
J
R
rachidkhSteward **
asked in Platform
Centreon broker - SQL errors

Hi evryone How can I solve the problem below? It happens to me every 2 or 3 days and it disappears after restarting the broket service. [2024-12-26T14:21:12.461+01:00] [sql] [error] mysql_connection 0x7f7b680225a0 attempts 2: could not store logs correctly:  errno=0[2024-12-26T14:21:14.419+01:00] [bbdo] [info] BBDO: received pb acknowledgement for 1000 events[2024-12-26T14:21:19.351+01:00] [bbdo] [info] BBDO: received pb acknowledgement for 1000 events[2024-12-26T14:21:22.474+01:00] [sql] [error] connection fail to execute statement 0x7f7b680225a0: error:  errno=0[2024-12-26T14:21:22.474+01:00] [sql] [error] mysql_connection 0x7f7b680225a0 attempts 2: error:  errno=0[2024-12-26T14:21:23.589+01:00] [bbdo] [info] BBDO: received pb acknowledgement for 1000 events[2024-12-26T14:21:27.476+01:00] [sql] [error] connection fail to execute statement 0x7f7b680225a0: could not store logs correctly:  errno=0[2024-12-26T14:21:27.477+01:00] [sql] [error] mysql_connection 0x7f7b680225a0 attempts 2: c

530
R
A
aalz0Builder *
asked in Platform
Error adding a Poller

Hi, Im trying to add a poller and I’m getting the following error.ERROR - http://my_central_ip:80 {“message”:”No parent platform was found for: ‘poller-1@’my_poller_ip’”} I think the problem is that this server doesnt see the Central one, but I dont understand why… Central works fine (with a remote ddbb)Any idea? I have fllowed the official documentation...

1641
R
J
JosepGGSteward *
asked in Platform
"First notification delay" for passive services

Dear all, I would like to skip notifications by mail about traps of short duration. What would be perfect is the “First notification delay (FND)” option for passive services, this FND works for non-volatile services, but I don’t know how to use it with traps (if I configure a passive service as a non-volatile, it doesn't work). The ideal way to work for me would be like this:To set a threshold for trap notification in 1 minute. Skip notifications for services switching from OK → CRITICAL → OK, with CRITICAL lasting less than 1 minute.Receive notifications for services switching from OK → CRITICAL → OK, with CRITICAL lasting more than 1 minute.Is that possible?Thanks in advance and Merry Christmasjosep garcia 

80
J
V
v-muhammed.suhileSteward *
asked in Platform
Poller is down and database issue 23.10.18

My root partition is full and I have tried with archive log files and I dropped some of the old database partitions using below commands to clear some space with help of chatgpt.Now Pollar is down and showing the database issue“ALTER TABLE log_archive_service DROP PARTITION p20231220, p20231221, p20231222, p20231223, p20231224, p20231225, p20231226, p20231227, p20231228, p20231229, p20231230, p20231231;”I checked the logs “cat /var/log/centreon-broker/central-broker-master.log  | grep 'error'”[2024-12-23T13:18:03.411-05:00] [sql] [error] mysql_connection: Table 'centreon_storage.data_bin' doesn't exist[2024-12-23T13:18:03.411-05:00] [sql] [error] connection 0x7fdcd0020fb0 fail to connect: Table 'centreon_storage.data_bin' doesn't exist[2024-12-23T13:18:13.412-05:00] [sql] [error] mysql_connection: Table 'centreon_storage.data_bin' doesn't exist[2024-12-23T13:18:13.412-05:00] [sql] [error] connection 0x7fdcd0020fb0 fail to connect: Table 'centreon_storage.data_bin' doesn't exist 

451
ponchoh
Centreonian
S
Stéphane
posted in Platform
Flapping detection

Hi,I’m opening this thread wondering if a lot of people use this feature. And how it makes them they be more efficient in their monitoring.In our case, one of the point that prevents us to do so is the fact that this functionality forbids using the state retention. At least this is what the help popup tells : Is this the case still? Is is still considered experimental nowadays?Docs (https://docs.centreon.com/docs/23.10/alerts-notifications/notif-flapping/  (24.10 is the same)) does not say so so I don’t know what to believe. Is it an obsolete indication in the UI or an omission in the docs? I found this post too, two years old, which seems to have been abandoned on a it-will-change-soon-be-patient status. What’s the deal on flapping detection?A last remark, I guess the maths are done whatever the functionality is used or not, because I can see a “Status change percentage” showing in services and hosts detail infos in the UI. Couldn’t be avoided for performance matters? Even if obviousl

280
S
S
Stéphane
asked in Platform
Centreon Engine 23.10.13

Hi,I see Centreon Engine version 23.10.13 being available in the repository for RHEL 8 but I find no release notes for it. Also, I find nothing in the Github from the commit indicated in the description from de RPM package.I see a release note for Centreon Collect dated december the 19th, from the description I understand that Broker and Engine, and the connectors (?!) have been grouped under this new name. Is that correct?Why such a oddly choice? Why Gorgone had not been included also then?What can you tell about that, or can you lead me to some documentation on the implications of this reorganisation of the software suite?

110
S
L
LaurentVSteward ***
asked in Platform
Hide username and password in custom service based on custom command.

Hello all,I created a custom command with multiple arguments, as URL, port, USERNAME and PASSWORD In service template definition, I would like hide values of USERNAME and PASSWORDIs it possible to hide these fields, as we can do it in “centreon service templates” Regards, Laurent

552
L
M
Martin-05Steward **
asked in Data collection
Centreon-central services error

Hello,can i find out why internal Centreon-central services are in "critical" state? They have been in this state since Centreon (VMWare OVA) was first launched. Other manually set services works.Thank You for help.

303
ponchoh
Centreonian
M
Martin-05Steward **
asked in Platform
Cannot install postfix

Hello,i need to install “postfix” but the official guide (for the same version as mine) doesn't work:Configuring your Centreon to send emails | Centreon DocumentationFirst step:apt install mailx cyrus-sasl-plainE: Package 'mailx' has no installation candidateE: Unable to locate package cyrus-sasl-plainHmm, so I try to install only mailx:apt install mailx Package mailx is a virtual package provided by:  mailutils 1:3.15-4  bsd-mailx 8.1.2-0.20220412cvs-1You should explicitly select one to install.So, I install “mailutils”:apt install mailutilsInstalled, but postfix service doesnot exists.sudo postfix statussudo: postfix: command not foundIf I try install cyrus-sasl-postfix again:apt install cyrus-sasl-plainE: Unable to locate package cyrus-sasl-plainWhy the official guide do not working? Am I doing something wrong?

13411
M

Badge winners

Show all badges
Terms & ConditionsCookie settings