Infra Monitoring Data usage and Visualization

Hello, Does anyone have experience with interoperability between Centreon and Cyberwatch?Thanks in advance and kind regards,  Milos

Hello, I want to monitor the power usage of an Idrac.I’m able to do it with snmpwalk but I want to have a graph like on my other services. What can I do ? Currently, the plugin doesn’t exist for my Idrac model. I tried to do it with SNMP Traps but it looks like it needs a licence and I don’t have it. Anyone has an idea ? Thanks and have a nice day !

Hello!I’m trying to use traffic metrics from interfaces with cisco-standard plugin, everything works correctly but I dont understand how cisco plugin obtain the values from the OID.For Exemple :/usr/lib/centreon/plugins/centreon_cisco_standard_snmp.pl --plugin=network::cisco::standard::snmp::plugin --mode=interfaces --hostname=xx.xx.xx.xx --snmp-version='3' --snmp-community='public' --snmp-username='supervision' --authpassphrase='xxxxxxxxxxxxx' --authprotocol='SHA' --privpassphrase="xxxxxxxxxxxxxx" --privprotocol='AES' --interface='^P22$' --name --add-status --add-traffic --oid-extra-display ifAlias --debugOK: Interface 'P22' [ xxxxxxxxxxxx ] Status : up (admin: up), Traffic In : 0.00b/s (0.00%), Traffic Out : 4.05Gb/s (40.52%) | 'traffic_in'=0.00b/s;;;0;10000000000 'traffic_out'=4052433008.00b/s;;;0;10000000000.1.3.6.1.2.1.2.2.1.5.22 = 4294967295.1.3.6.1.2.1.2.2.1.7.22 = 1.1.3.6.1.2.1.2.2.1.8.22 = 1.1.

Bonjour,Je n’arrive plus à afficher des graphs monitoring avec les widgets pour les vues personnalisées alors que d’autres widgets fonctionnent. (voir photo)Et même dans Supervision > Informations de performance > Graphiques je n’ai pas d’affichage.  Au début de l’installation de Centreon il y a quelques mois j’avais l’affichage des graphiques sur n’importe quelle vue, mais du jour au lendemain ils ont disparus et je ne sais pas pourquoi.J’ai essayé des solutions trouvé sur d’autres postes similaire mais je n’ai pas eu de résultats positifs dans mes essais.Je voudrais savoir si quelqu’un à une solution et si c’est lié ou pas au fait que je n’ai pas de licence (ex

HelloMy centreon server is under debian 11 and I use Centreon version 23.04.8.I have carefully followed the tutorial on the vmware plugin here https://docs.centreon.com/fr/pp/integrations/plugin-packs/procedures/virtualization-vmware2-esx/and the file /etc/centreon/centreon_vmware.pm  seems to be well configured since I have feedback from my test esxi in centreon:exemple: Esx-HealthOK: 0 total health issue(s) found - Host 'esxi-04.domain.lan' : status connected - 60 health checks are green, 60 total health issue(s) found, 0 yellow health issue(s) found, 0 red health issue(s) found - sensor 'System Board 1 Ambient Temp' temperature: 25 C - fan sensors are ok - sensor 'Power Supply 1 Voltage' voltage: 230 Vchecking host 'esxi-04.domain.lan'status connected

Hello all,We are on Centreon 23.04 wtih some pollers.If the hosts is UP we never receive UNKNOWN notification as desired on our configurations.but,When the hosts is down (soft or hard I don’t know for now), the services send notifications for UNKNOWN stats, this is unwanted by the configurations do on users notifications option and on the services-models. for exemple,the service W are configured by the service-model X for sending notification to groupe of user Y of which Z1 and Z2 are members. The service W is configured like this :    Notification enabled : default    Linked Contact Groups : - ( nothing selected )    Notificat

Hi,What would be the best way to establish the following:We have 2 datacenters, and we consider 1 DC to be the primary site, and the other to be the backup site.We are hosting a number of appliances and by default, the primary/active node should reside in DC 1. I want to make a visual in Centreon MAP (Legacy) that shows where the primary node is for a list of Netscaler/Checkpoint and BigIP-F5 clusters.Example from the netscalers:sudo -u centreon-engine /usr/lib/centreon/plugins//centreon_generic_snmp.pl --plugin=apps::protocols::snmp::plugin --mode=numeric-value --hostname=xxxxxxxxxxx --snmp-community='public' --snmp-version=xx --snmp-username='xxxxxxxxx'  --verbose --authprotocol='SHA' --authpassphrase='7xxxxxxxxxxxxxxxxxx7'  --privprotocol='AESxxx' --oid='.1.3.6.1.4.1.5951.4.1.1.23.3.0'  --change-short-output='2~Primary~gi' --change-short-output='1~Secondary~gi'The above works and gives me “Primary” and “Secondary” as output, for th

Good afternoon,I would like to know if there is any way to convert the data collected by SNMP from bit to Gb.I'm trying to monitor a disk and it gives me the used and total space in bits.With this operation I could do:"%(hrStorageEntry.hrStorageUsed) * 100 / %(hrStorageEntry.hrStorageSize)"but I don't know where to do it so that it is executed and saved in a variable, so that it can be printed later. I have tried the following tutorial: But it doesn't work for me, since the "function" is for count the result. Is there any function that can do what I am saying (multiply or divide the collected metrics inside de JSON structure)? I guess it will have to be executed within the selection_loop, because I need to calculate it for each line returns.Could you give me the list of functions that can be used? I can't fi

HelloI monitoring “Top 10 Memory Usage” & “Top 10 Cpu usage"How can I monitor the top 10 storages of my disks servers on the home page?Thanks in advance to the experts

Dear Thewatch community, I’m facing with an issue related to MBI Reports. There was some configuration errors, and to be honest I’m not really aware of this component.However, I’m pretty sure that the centreon_storage database location should be the same as the one use to collect the KPI.  In my configuration I think the error is that the database definition on the component seems tp be wrong.I tried without success to fix by changing this setting, and of course the new parameter is unable to be applied!the url is centreon/main.php?p=30231 and tab “Reporting widgets” When I set the new setting I’ve a message like if the authentication was expired.“The form has not been submitted since 15 minutes. Please retry to resubmit here”of course, If I retry to submit it does the sam

Hello,i am using centreon 22.10.12 with almalinux 8.8 , since last tuesday the poller does not check/actualize the services or the host and i cant force check anymore the services, its like the web interface frozen, i can see the host , i can see the services but nothing happens, the number of host & services is OK. i tried those commands :systemctl restart cbd. systemctl restart centengine. systemctl restart centreontrapdBut none of this commands fixed my issue, since about 3 days i cant see the service down, the host down. it shows the same information since this day.Can anyone helps me?Best regards,

Hello Everyone,  We are monitoring our Cisco 8500L via snmp and the command net-cisco-standard-snmp-traffic-name for the internet connection. It’s almost working fine, except that some time (probably around 3 to 4 time), we have a value way too high registered (around 4Tb :D). The biggest concerns is that it modify the scale of the graph, which is unreadable when one of those value are registered. Is this possible to ignore a value within a graph setting ? Or any “trick” that could do the job on this kind of matter ? Best regards,

Hello,  Since the update 23.04.6, I no longer have any history on the events of my probes. I have this error message : Symfony\Component\HttpFoundation\Response::__construct(): Argument #2 ($status) must be of type int, string given, called in /usr/share/centreon/src/EventSubscriber/CentreonEventSubscriber.php on line 428 Has anyone encountered this problem before? Regards, Florian

Hello,  I set retention time to 20 days, but all of my database are growing fast.  After some researches, i found a cron task which is executed all nights. When i look into the logs, i saw this error :  PHP Warning:  file_put_contents(/var/log/centreon/sql-error.log): Failed to open stream: Permission denied in /usr/share/centreon/www/class/centreonLog.class.php on line 193 I try to execute “sudo -u centreon php /usr/share/centreon/cron/centstorage_purge.php” but i got same error.  Is there anything i can do to solve this bug ? Regards,  Florian

HelloI have a behaviour that I can't identify.For memory/swap probes I have 2 equivalent services (they have the same service model), but one has graphs that work, while the other does not. What I don't understand is that on the CPU and Load probes, the graphs work correctly.The graph model is related to the service model, so they have the same configuration.Do you have any ideas?

Hello all,I want to increase the retention time of RRDs for graphics on services/metrics already deployed.Over 10k services.What is the best solution ?I have tested the Centreon option “regenerated the RRD databases”  but I lost the metrics data history.Is it possible to do this without losing the existing RRD data ?Thanks a lot

Hello,I would try centreon to monitoring AS400 ibm i server but i have many troubleshooting.I can ping my host AS400 with the base_host_alive command.I have IBM AS400 Connector installed.I try to create a CPU service with OS-AS400-CPU command for an host but he have an unknown status with (No output returned from plugin).Someone can help us ?Best Regards  

Hello, I am pretty begginer in this area, but I would try to learn more. It monitors disk occupancy at 99% by giving Critical and Warning limits in percent. In contrast, I recently had to change from % to Byte.  After this change, the monitoring works properly, but the displayed chart no longer does.  How it was set and look like:/usr/lib/nagios/plugins/centreon-plugins/centreon_plugins.pl --plugin=os::windows::snmp::plugin --mode=storage --hostname=10.10.10.10 --snmp-version='2c' --snmp-community='Test' --storage='D:' --name --display-transform-src='^(..).*' --display-transform-dst='$1' --warning-usage='85' --critical-usage='90' --explode-perfdata-max='used,size' --filter-perfdata='size|used|free' --regexpGraphics chart looks like this

Hello,there is a missing dot after number 4 on line 11136 in file centreon_mikrotik_snmp.pl.my $mktFrequenOid = '.1.3.6.1.4.1.14988.1.1.1.3.1.4';but it should bemy $mktFrequenOid = '.1.3.6.1.4.1.14988.1.1.1.3.1.4.'; And I have one cosmetic question. For modes list-ssids and list-frequencies I need to click on details to see the results. See screenshots. How to change the perl code to see results in one row like other modes? Thanks.   

Hi everyone!.Is there a way to set the email notification information? I mean, I want to differentiate notifications from host services. And in this way, to be able to obtain greater detail of the problem.Thanks! 

Hello,I checked that my graphics are updating but it is showing delay. All services.This happens only in the central, in the remote servers they are ok.I don't see any errors in the rrd, broker files...Does anyone have any ideas?delayed about 3 daysLast 7 days: 

Hi there,I recently updated centreon from 23.02 to 23.04.Now, all my graphs are stating that there is no data like so : Can you please help me solving my issue ? =)   PS: I do not think it has anything to do with it, but I had to run this command for centreonweb to work : /usr/share/centreon/bin/console cache:clear I do have centreon-broker-master properly configured (I checked other posts solutions)

I use afresh install and i ‘am unable to lunch centreonBIETLi have this issue/usr/bin/perl: symbol lookup error: /usr/lib64/perl5/vendor_perl/auto/Net/Curl/Curl.so: undefined symbol: Perl_xs_apiversion_bootcheck

Hello The Watch Community !I’ve received this request from a user : to add in Centreon a monitoring from a file (CSV or Excel) or a mail, with this kind if information :DateTime | Status (OK or KO)Data are sent each 15 minutes. The request is to exploit the data to create a chart, and be able, as usual with Centreon monitoring, to handle issues, by sending mail to a dedicated email address.I really don’t know if the content of a file or a mail can be used as a source for monitoring.Thank you !

HelloI have a Centreon 20.10.18 server and for a while I've been having a little problem viewing network graphs.Outbound graphs are well-drawn, but although data from outgoing connections exist, the inbound graphs are not visibles 😥Exemple:I have this behavior on absolutely all network card graphicsIf you can help me and solve this problem I would greatly appreciate it.Thanks in advance