Infra Monitoring Data usage and Visualization

Hi,Since the last update (version 20.10.4), I’ve been experiencing issues with my VMware setup. The account field in /etc/centreon/centreon_vmware.json is empty, and when I try to resend the login from the Centreon UI in the "Additional Connector Configurations" section, I get the following error:[parameters.vcenters[0].username] The string is empty, but a non-empty string was expected.This issue occurs on all my vCenter hosts. Do you have a solution? When I recreate a vCenter, it works fine. 

Hello,Since updating to 24.10 (via packages on Debian 12), some of my graphs are in negative.The values received are in positive.It includes CPU, Memory, Storage and some other counters.RAM DiskCounter

Hello,I’ve been asked to know if it is possible to monitor the result of a command like “show ip route” on a CISCO router.Do you know if Centreon is able to do it ? Or perhaps with ntopng ?Thank you for your help,

Hello,On my Centreon, I would like to keep the "ping" check command, but I also want to add alerts for disk storage at 80% and 90%. I’ve tried using custom macros, but I don't fully understand how to set them up.Thank you in advance for your help.

Hello team,I have this problem after updating the central server to 24.10 and debian 12: 'UNKNOWN: SNMP GET Request: Cant get a single value.' for memoryMy affected client machines are running snmpd version 5.7.3, whereas I have no problems with machines running version 5.9. Here is a command test on an affected machine:snmpwalk -v 2c -c local 192.168.10.55 1.3.6.1.4.1.2021.4 iso.3.6.1.4.1.2021.4.1.0 = INTEGER: 0 iso.3.6.1.4.1.2021.4.2.0 = STRING: "swap" iso.3.6.1.4.1.2021.4.3.0 = INTEGER: 0 iso.3.6.1.4.1.2021.4.4.0 = INTEGER: 0 iso.3.6.1.4.1.2021.4.5.0 = INTEGER: 7973292 iso.3.6.1.4.1.2021.4.6.0 = INTEGER: 475924 iso.3.6.1.4.1.2021.4.11.0 = INTEGER: 475924 iso.3.6.1.4.1.2021.4.12.0 = INTEGER: 16000 iso.3.6.1.4.1.2021.4.13.0 = INTEGER: 8232 iso.3.6.1.4.1.2021.4.14.0 = INTEGER: 123128 iso.3.6.1.4.1.2021.4.15.0 = INTEGER: 2331200 iso.3.6.1.4.1.2021.4.100.0 = INTEGER: 1 iso.3.6.1.4.1.2021.4.101.0 = STRING: "Running out of swap space (0)"An example that works

Hi, I am seeing gaps in my performance graphs. The gaps seem to be completely random and appear at different times for services on the same hosts or for other hosts/services. Could someone explain what could be the issue?  

Hello The Watch,I have a WSUS Dashboard that is supposed to show me various single metrics reported by NSClient++Below, we can see that the host's service values are correctly taken into account by the poller.OK: Computers Up-to-date: 242, Needing Updates: 12, With Update Errors: 0, Not Contacted: 261, Unassigned: 1 | 'computers_up_to_date'=242;;;0; 'computers_needing_updates'=12;;;0; 'computers_with_update_errors'=0;;;0; 'computers_not_contacted'=261;;;0; 'computers_unassigned'=1;;;0;But when I create the DashboardAll values are zero!An open case on the support side.Thanks for your help.Best regards,Vincent (Nantes Métropole)

Hello,I would like to send a sql query to a database and get the value (using a select count etc...) I can do it from the 'command line' but from the web interface I am completely lostThanks for your help

Hello,Centreon 24.04I have configure an script to check the memory consume of IIS App Pools.In graph tab i can see the 1 day graphic, but if a click on 7 days i got this error:I have seen this post but I dont know if is the same case.Thanks,

Hello,I am currently working on the automatic creation of Business Activities, respecting specific groupings to display these Business Activities on maps and provide an application-specific view suitable for sharing or displaying on screens for all critical applications.To achieve this, I use CLAPI to automatically create Business Activities, specifying only the server type (e.g., DB, APP, RDS, etc.).I now also have access to the Map API and have added functionality to my script for automatically creating views tailored to my applications and Business Activities, based on a file provided to the script.However, I am currently stuck when trying to add Business Activities to the map using the Map API. I am attempting to create a map and add a Business Activity (BA) to it using its ID from an external script, but I consistently encounter an issue where the BA is reported as not found.Below are the errors and scripts:Term

Hello ! We would like to push centreon alerts to our webex communication tool. Is this possible?   

Bonjour j’ai déployer centreon 24.4 sur une VM debian12 , et  je souhaite votre aide pour  avoir un rapport hebdomadaire de l’état de mon infra  par mail . j’utilise une licence IT-100

Hello,Unless I’m mistaken, it is not possible to share a playlist with a public link in Centreon 24.04.8.Are there any plans to add this feature in a future version 24.04.x ?Thanks for your help  

Hello,I'm a little confused about this situation and I don't know how to correct it.The documentation for the connector indicates that it returns the results of network traffic counters in b/s, but in reality, it returns in Bytes/s, that devirtualizes the service graphs. Do you know how I can correct this situation? Is there a way to transform the metric value?Thank you so much.CentreonUnifiDreamMachineRef.: https://docs.centreon.com/pp/integrations/plugin-packs/procedures/operatingsystems-linux-ssh/Centreon 24.04.8

Bonjour, j’ai un soucis sur les tableaux de bord.En effet, j’ai réinstallé une debian 12 avec centreon 24.10.1. J’ai juste créé 15 Hosts avec 2 services chacun.Quand j’affiche dans le tableau de bord, cela reste bloqué à 10 hosts et j’ai le double de services (60). par contre quand je clique dessus, j’ai bien le bon nombre dans le statut des ressources. Comment résoudre ce bug ? merci

Hello, Maybe someone can help me.I try to create reports using MBI.My reports are ok with pdf or xlsx extension BUT… When I try to export in csv, report file is empty, no data inside. Can someone say me why and how to create csv exports? regards, Laurent

Good morning,I don't understand why when I query an OID with the plugin, it doesn't go critical as requested.Am I doing it wrong? the format is not correct?If anyone can guide me please :)it's always OKThank you in advance for your help,Sincerely 

hello,i must create a new monitor with Pure Storage FlashArray Rest API v2 on the arraysi dont undestand the status of --critical-read or write on --plugin=storage::purestorage::flasharray::v2::restapi::plugin --mode=arraysi dont know what the value for a filterthanks

Hello everyone and thank you for your attention,there is a few issues that i encounter since some time with my dashboard experience in Centreon.For context, the service i’m having the most problem with is a custom service that returns the 10 users that use the most cpu on one server.the service uses a script and returns each time 10 metrics with this format *user1*_cpu = 6% ; *user2* … The problem happens when i want to display this in a graph or any other display tool, because my metrics are dynamic, each time it runs the metrics names change as well (if there is a change in which user uses more cpu).For some time now my solution was to manually add all the new metrics in the graph until all of the users were covered but a graph with 90 metrics or so is very unstable even if there is only 10 active at a time.All that i want is to display the 10 users that are returned by my service and the value associated with it but i can’t

bonjour,je n’arrive pas à comprendre pourquoi j’ai cette erreur :UNKNOWN: Can't construct cachesur cette requette/usr/lib/centreon/plugins//centreon_linux_snmp.pl --plugin=os::linux::snmp::plugin --mode=storage --hostname=xxxxxxxxxxx --snmp-version='3' --snmp-community='xxxxxxxxxxxxxxxxxxxxxx' --snmp-username='xxxxxxxxxxx' --authprotocol='SHA' --authpassphrase='xxxxxxxxxxx' --privprotocol='AES' --privpassphrase='xxxxxxxxxxx' --storage='^/var/app_data$' --name --regexp --display-transform-src='' --display-transform-dst='' --warning-usage='80' --critical-usage='90' --verbose --extend-perfdata='used,used_%,percent()' --filter-perfdata='storage.space|used|free|used_%'.pourriez-vous m’aider merci 

Hello,In the Dashboard, when I search for a host in the Dataset selection / Host field, I don’t find what I’m looking for. I can type “PAB-s,” but the search bar still displays hosts starting with "A." Even when I scroll down to "P," I can’t see the exact host I’m looking for.For your information, the host is up, and I have some widgets working perfectly on it in Custom Views. The search bar works fine for me in other menus/pages. (even with hundreds of items). 

In 24.04.7, We can not see meta service in Dashboards widget. Is it normal ? Thanks,Regards

Hello,We are encountering an issue with the centreon_aws_rds_api.pl plugin when checking the status of an Amazon RDS MySQL database. The state is not being displayed correctly. /usr/lib/centreon/plugins//centreon_aws_rds_api.pl --plugin=cloud::aws::rds::plugin --mode=instance-status --custommode='paws' --aws-secret-key='' --aws-access-key='' --aws-role-arn='' --proxyurl='' --region='eu-central-1' --filter-instanceid='^awsp-rdsmysql-xxx-core-db$' --zeroed --verbose  --warning-status='%{state} =~ /maintenance|modifying|renaming|upgrading|stopping/' --critical-status='%{state} =~ /stopped|failed|storage-full|rebooting|deleting|restore-error/'Use of uninitialized value in sprintf at /usr/lib/centreon/plugins//centreon_aws_rds_api.pl line 12131.Redundant argument in sprintf at /usr/lib/centreon/plugins//centreon_aws_rds_api.pl line 12131.OK: Total instances available : 1, failed : 0, backing-up : 0, maintenance : 0, stopped : 0,

hello,in the event logs page, there is no more information regarding acknowledgement or notification on this page. Only the status (warning, critical, unknown,OK)is this a known issue? i tried to change the debug levels on centreon engine then switched to V1 or V2 without acces thanks for your feedbacks, Regards AM

Hi at all,I monitor some network interfaces on Linux servers. I use centreon_linux_snmp.pl plugin in interfaces mode.Below the command:/usr/lib/centreon/plugins//centreon_linux_snmp.pl--plugin=os::linux::snmp::plugin--mode=interfaces--hostname=*********--snmp-version='2c'--snmp-community='*******'--interface='.*'--name--add-status--add-traffic--critical-status=''--warning-in-traffic='80'--critical-in-traffic='90'--warning-out-traffic='80'--critical-out-traffic='90'--verbose--change-perfdata='traffic_in,,scale(Mbps),mbps'--change-perfdata='traffic_out,,sc