Skip to main content

Centreon Forums

Learn more about the Centreon platform.

2396 Topics
L
LaurentVSteward ***
asked in Data collection
Backbox Plugin Issue

Hello, I have an issue with Backbox Plugin and I don’t know if someone experienced the same.For “Backup” mode, all is ok, So API Token is validated :-)But for “Device-Backup” and “ConfigStatus” modes, I have a “404 not found” issue. In command Line, for “Device-Backup”, I thnik there is an issue related to urls in plugin.It does a GET on 2api/devices” and give a result:But just after, try to join “/rest/data/token/api/devices/dynamic”and this 2 times… I don’t think “Dynamic” exists.Maybe someone experienced this??? Regards, Laurent

553
ltirand
Centreonian
R
raikkonen7Steward **
asked in Platform
How to add my hosts to new host groups?

Hello,I have around 1000 VMs which I added initially into host groups like prod, preprod, uat etc. The VMs are a mix of windows and linux. Now since I will be using snmp templates and some will use linux_snmp and some will use windows_snmp templates, I want to create 2 new host groups - windows and linux. Now I want to add my hosts into these host groups. What would be the easiest way to do it please? via csv import for example. How to add my already added hosts to these new groups without impacting the existing hosts or host groups. For example, I cannot delete and readd all hosts with updated host groups. I dont have autodiscovery license.  

834
A
J
jbossSteward **
asked in Platform
Can't attach remote poller to central with registerServerTopology.sh

Hello;i just fresh install a server central with the automatic processus “Unattended installation of a central server” version 24.04once installed , i set the https access to the central GUI and i can connect on it with a self certificate. Now i would like to register a remote server with same process install “Unattended installation of a central server” version 24.04”.once installed, when i run /usr/share/centreon/bin/registerServerTopology.sh -u admin -t remote -h ipcentral -n remoteserver1 --insecurei have this issue: 2024-09-04 18:25:46+02:00 - ERROR - ip remoteserver: {"code":500,"message":"Request to the Central's API failed : Recv failure: Connection reset by peer for \"http:\/\/ipcentral\/centreon\/api\/v24.04\/login\"."} could you help me?thank

1536
B
X
xoryaSteward **
asked in Data collection
Gorgone configuration file : Error when connecting to the Gorgone server

Hello everyone I had deployed a machine as a poller and connected it to centreon, then later i exported it to a different network and wanted to attach it to a different centreon server, however the command “/usr/share/centreon/bin/registerServerTopology.sh -u admin -t poller -h 192.168.0.1 -n poller-1’ was run succesfully and I could see the poller in the list when I went to add it, however when It came to the gorgoned file I click to copy the contents and I see the error above, I’m unsure what I’m supposed to do, I deleted the old gorgoned file and restarted the service on both the central and the poller, and redeployed the poller and added it again, still same issue, I’m unsure what I should do, I also deleted the log files and the key files: rm -rf /var/lib/centreon-gorgone/.keysrm -rf /var/log/centreon-gorgone/*

9720
X
M
morganSteward *
asked in Data usage and Visualization
How to display the MAPs on the Web interface ?

In the Monitoring > Map menu of the Centreon web interface, in 21.10 version, what are the prerequisites for displaying the different MAPs that we create with our heavy client? I can see them, but my colleagues can’t, and I don't know why, since we belong to the same groups so the same rules are applied to us. Do we need to change something at the ACL level ? Is there any parameters on their profile that I need to change ?

324
N
Centreonian
D
davide.bissaccoSteward *
asked in Data collection
Net-Cambium-cnPilot-SNMP

Hello,I install the last connector but on plugins folder there isn’t a pl file to excecute the plugin.Anyone have solved this problem?Thanks

125
ltirand
Centreonian
J
Julien RSteward **
asked in Platform
How to avoid to many oradiag files for check centreon_oracle.pl?

Hi, I have a poller with many Oracle databases monitored by Centreon’s plugin centreon_oracle.pl.But I have a lot of trace files in directory “/var/tmp/oradiag_centreon-engine/diag/clients/user_centreon-engine/host_<123456789>_<123>/trace”.This leads my poller to ran out of inodes:Filesystem                                Inodes   IUsed  IFree IUse% Mounted on[...]/dev/mapper/vg0-racine                   1237888 1237888      0  100% /[...] There is a way to avoid that?

1282
J
S
SnarkSteward *
asked in Platform
Centreon24.04 404 on api/latest/platform/installation/status

I made a manual offline installation on a redhat 9 server of centreon 24.04. After correcting some things, I thnik my installation is not the cleanest but should be working. Instead, everytime I go to the centreon login page I have a big centreon logo, a  You need to enable JavaScript to run this app message and if I check the inspect page and the access logs, I have a 404 error on /centreon/api/latest/platform/installation/status, and I cant find this file anywhere??

195
Laurent
Centreonian
O
OlivierRRSteward *
asked in Data collection
[CENTREON 24.10.5] Extreme Network Plugin

Hi everyone, We are new in Centreon configuration and we get some issues using one plugin. I’m french so I hope my English will be understandable. We just install the plugin “Extreme Network” on our Centreon  24.10.5 to monitor our Extreme switches.We configured SNMPv3 on our Extreme switches :$enable snmp access$configure snmpv3 add user toto authentication sha tototitiauth privacy aes tototitipri$configure snmpv3 add group admin user toto sec-model usm$configure snmpv3 add access admin sec-model usm sec-level priv read-view defaultAdminView write-view defaultAdminView notify-view defaultNotifyView In Centreon, we create these entries for the host model :SNMPUSERNAME    totoAUTHPROTOCOL    SHAAUTHPASSPHRASE    ‘tototitiauth’PRIVPROTOCOL    AESPRIVPASSPHRASE    ‘tototitipri’SNMPEXTRAOPTIONS We select the v3 for SNMP version and do not define the name SNMP community. Not necessery in SNMPv3. With the command “snmpwalk” from our Central Centreon to our switch with this command :$snmpwalk

426
O
H
Horst KitschSteward *
asked in Data collection
Cisco stackwise virtual status shown as 'notredundant'

/centreon_cisco_standard_snmp.pl --plugin=network::cisco::standard::snmp::plugin --mode=stackis doing fine for physical stack switches.We have some stackwise virtual switches in fine condition, but this check is showing up as ‘notredundant’.old classical stack:OK: Stack status is 'redundant' - Number of members waiting: 0, progressing: 0, added: 0, ready: 2, SDM mismatch: 0, version mismatch: 0, feature mismatch: 0, new master init: 0, provisioned: 0, invalid: 0, removed: 0 - All stack members status are ok | 'waiting'=0;;;0; 'progressing'=0;;;0; 'added'=0;;;0; 'ready'=2;;;0; 'sdm_mismatch'=0;;;0; 'version_mismatch'=0;;;0; 'feature_mismatch'=0;;;0; 'new_master_init'=0;;;0; 'provisioned'=0;;;0; 'invalid'=0;;;0; 'removed'=0;;;0;.1.3.6.1.4.1.9.9.500.1.1.3.0 = 1.1.3.6.1.4.1.9.9.500.1.2.1.1.3.1000 = 1.1.3.6.1.4.1.9.9.500.1.2.1.1.3.2000 = 4.1.3.6.1.4.1.9.9.500.1.2.1.1.4.1000 = 15.1.3.6.1.4.1.9.9.500.1.2.1.1.4.2000 = 14.1.3.6.1.4.1.9.9.500.1.2.1.1.5.1000 = 0.1.3.6.1.4.1.9.9.500.1.2.1.1.5.2000

243
C
Centreon Lord Commander
M
morganSteward *
asked in Data usage and Visualization
Traffic Ressources on MAP 21.10

Hello,I have different resources named “Traffic” (from an interface) that i want to put on a view, on Centreon MAP 21.10. But when i select “Geometric style”, a green little triangle appears. I want to increase it size, so we can be able to see it when we’ll display the view on a screen, but increasing the size (by stretching the corners) just increase the size of the surface of the icon, and not the size of the triangle properly. Do you have any other solution so we can see it more easily ?

71
Laurent
Centreonian
ensenada
ensenadaSteward ***
asked in Platform
Pdo object is not initialized, contructor was not called

Hello,Im following the migration guide:https://docs.centreon.com/docs/migrate/migrate-from-el-to-debian/#prerequisites After done the steps 4 adn 5 from Step 2 : Synchronize the data, i cant log in the web interface, i got this error Before done this steps i was be able to login with local admin.How can i fix it? Thanks,

7034
Y
J
journeytothecenteroftheearthSteward *
asked in Platform
Centreon Update is stuck on "Congratulations, you have successfully upgraded to Centreon version 24."

Hello guys,Everytime I try to update to a newer version of Centreon starting from Centreon 24.04.4 to a newer version, the update gets stuck on "Congratulations, you have successfully upgraded to Centreon version 24.04.11”. The page that it’s stuck onWhat I have tried so far:I try to update to version 24.10 after to see if it resolved the problem (which it didn’t )I checked the storage, there is still plenty.I checked that all the services required were at the right version and started. (but I could have missed one)In the installation process I get prompted those lines :chmod: cannot access '/var/cache/centreon/config/engine/*': No such file or directorychmod: cannot access '/var/cache/centreon/config/broker/*': No such file or directorySo i’m wondering if it could be a rights attribution problem.Also when I click the finish button I get prompted for a quarter of a second the following:The error that gets displayedBut it could be unrelated. Do you guys have any ideas about what could b

201
Laurent
Centreonian
C
Cm123Steward **
asked in Platform
Does 24.10 require GLIBC_2.34 ?

Hello , I am upgrading my platform from 23.10 to 24.10. But while upgrading centreon 24.10 need GLIBC_2.34 and upward. So how can we upgrade GLIBC? How can i Proceed further?  Thank You

121
Laurent
Centreonian
M
mathiasSteward **
asked in Platform
Monitoring UDP port

Hi,Checking TCP is ok, but how do i check an openvpn UDP port?  /usr/lib/centreon/plugins//centreon_protocol_udp.pl  --plugin=apps::protocols::udp::plugin --mode=connection  --hostname=192.168.0.1 --port=1111CRITICAL: Connection failed on port 1111 thanks,Mathias🤔

61
Laurent
Centreonian
K
KoloSteward *
asked in Platform
Hôtes en état d'attente, pending

Bonjour,Hier matin en supervisant mes imprimantes, je parviens à faire fonctionner les services de ces hôtes, mais malgré le fait que les ping soient fonctionnels pour une majorité d’appareils, l’interface web me dit toujours que mes appareils sont dans un état de pending, donc en attente d’être validé soit 24 heures après l’ajout de tous ces hôtes.Merci pour vos réponses.

131
Laurent
Centreonian
F
fgoebelSteward *
asked in Platform
How to manage access by membership in Active Directory Groups?

Currently we have a working LDAP connection to our AD but we import users manually and remove them manually when access should be stopped.This is a certain administration effort, the only advantage is that users can user their AD credentials to authenticate.  Target is to manage user access to Centreon only in AD, e.g.,all members of the AD group Group_A should be member of a certain Centreon contact group, e.g. “Admin” all members of the D group Group_B should be member of a certain Centreon contact group, e.g. “ReadUsers” …When a user has been removed from the corresponding AD group access to Centreon should be removed automatically.Long story short: Centreon access rights should be managed fully in AD without need to manage users in Centreon. Is this possible? Official documentation is not very helpful (https://docs.centreon.com/docs/administration/parameters/ldap/).For me this seems to be the standard how authorization should work. I searched in TheWatch as well but I did not found

151
Laurent
Centreonian
L
LEBRETONSteward ***
asked in Data collection
HTTP Collection: howto create json file with basic athent API like username:password

Hello,I have an API whose authentication is only done by user/password: basic authentication.How can I translate this into the json file?Knowing that I only want to provide the user and password, and not the base64 encoding of user/password in the header.

323
L
A
Alexis63Steward *
asked in Platform
Remote server running on Central but not displayed running on the Remote Side

Hi,(Sorry in advance for my English) I’m trying to link a Remote Server on a Central both behind a firewall. Everything is Working (i can supervise some equipement on the remote network) but the Poller on the Remote is still displayed as “Central” and not running. On the Central side, everything is working and the Remote is displayed as working and updating. Is this an issue on the Remote ? Thank you in advance for your help.

7310
K
S
sheineckSteward *
asked in Platform
Problem with unattended.sh install 24.10 on AlmaLinux 9.2 ESU (Tuxcare)

The issue is specifically with PHP v8.2 install.  It appears that for Alma v8 it would use the remi repository, but when the OS is v9 it does not use the remi repository.My operating system is AlmaLinux v9.2 ESU (with Tuxcare).   It appears that the unattended.sh script tries to install php 8.2 (required for 24.10) using the command “dnf module install php:8.2”.I have installed PHP 8.2 from the remi repository outside the unattended.sh script, is there an option to the script to skip the php install during the installation process?I have also posted this on the CloudLinux support site to get their take on it and still waiting on their response. ThanksSteve H.

50
S
M
midwintergatesSteward *
asked in Platform
Centreon can't connect to db removing token

Hi,I have a centreon 24.10.4 environment at work and we currently ran into one issue after migrating an old environment.Everything works fine except we noticed the postfix sends a mail every minute which seems to be a result of centreon-tokens not being able to remove outdated tokens.This is what /var/log/centreon/centreon-tokens.log is saying.#1 {main}  thrown in /usr/share/centreon/www/class/centreonDB.class.php on line 165PHP Fatal error:  Uncaught Exception: SQLSTATE[HY000] [1045] Access denied for user 'centreon'@'localhost' (using password: YES) in /usr/share/centreon/www/class/centreonDB.class.php:165Stack trace:#0 /usr/share/centreon/cron/outdated-token-removal.php(35): CentreonDB->__construct()#1 {main}  thrown in /usr/share/centreon/www/class/centreonDB.class.php on line 165 This is from the postfix logMar 12 09:21:01 centreon postfix/smtp[2613111]: 369C81C0AA0: to=<www-data@centreon.xxx.se>, orig_to=<www-data>, relay=smtp.xxx.se[192.168.x.xxx]:25, delay=0.15,

673
J
R
RiccardoSteward *
asked in Platform
Remote centreon server

Hello,I have my centreon server who’s on another site, to access it I use proxy cause i currently have PRTG and I want to change it to centreon. So temporarly I access my centreon all with url’s :PRTG : myurl.com Centreon : myurl.com/centreon/loginAnd the thing is whenever I want to connect my poller , who’s on another site, to that remote server he can’t find it. 

332
R
S
S.lhotellierSteward ***
asked in Platform
Restart broker 24.10 on remote server

Bonjour Je viens de migré une partie de mon infra de centreon 23.04 vers 24.10.5.J’ai des remote server.lorsque j’essai de les reload ou restart depuis l’interface web du central, les broker ne sont pas relancer.gorgoned.log : 2025-03-18 10:48:11 - DEBUG - [pull] read message from external: [ACTIONENGINE] [4c0377c5d7047c4200ddb350137041d73f2090489eb8903c6bea8ccbc5764f3f9f8c793823e93f8253476e60dd186645afdb3ab9c6e49b7cee7d9f79b50c16aa] [25] {"logging":0,"content":{"metadata":{"centcore_cmd":"ENGINERESTART","centcore_proxy":1},"command":"sudo systemctl restart centreon_vmware.service"}}2025-03-18 10:48:11 - DEBUG - [pull] internal message: [ACTIONENGINE] [4c0377c5d7047c4200ddb350137041d73f2090489eb8903c6bea8ccbc5764f3f9f8c793823e93f8253476e60dd186645afdb3ab9c6e49b7cee7d9f79b50c16aa] [25] {"logging":0,"content":{"metadata":{"centcore_cmd":"ENGINERESTART","centcore_proxy":1},"command":"sudo systemctl restart centreon_vmware.service"}}2025-03-18 10:48:11 - DEBUG - [pull] read message from ex

867
S
E
eric-PSteward *
asked in Data collection
comment superviser l'état de disques sur un NAS Qnap

Bonjour,Depuis quelques jours, je m’intéresse à Centreon pour superviser mon parc informatique.J’ai installé Centreon 24.10.7 sur une VM, puis quelques hôtes et services.Le service « ping_lan » affiche bien que mes éléments supervisés sont bien actifs maisje bute sur comment visualiser l’état des disques constituant un NAS Qnap.Mon service est bien basé sur le modèle « HW-Storage-Qnap-Disk-Global-SNMP-custom », les valeurs de la macrosont celles de base.Le status des ressources est réactif mais je n’ai pas saisi où indiquer à Centreoncomment checker les disques du NAS.merci pour votre aideEric 

464
E
F
fringSteward *
asked in Platform
"An error occurred during authentication" after migration

I have followed the guide https://docs.centreon.com/docs/migrate/migrate-from-3-4/migration from-3-4 to 24.Just a few error when"Everything is ready !Your Centreon Platform is about to be upgraded from version 2.8.26 to 24.04.6"I had to manually run the SQL statements in the files:/usr/share/centreon/www/install/php/Update-20.04.19.php/usr/share/centreon/www/install/php/Update-20.10.11.php/usr/share/centreon/www/install/php/Update-20.10.12.phpBut when the migration is done, and I try to login, I get:"An error occurred during authentication"   If I check the browser DevTools console (F12), i see “500 Internal Server Error”. BRFredrik

3994
D

Badge winners

Show all badges
Terms & ConditionsCookie settings