Skip to main content

Centreon Forums

Learn more about the Centreon platform.

2468 Topics
S
StanislasRSteward **
asked in Data usage and Visualization
Service format

Hello, I’m configuring services for my Centreon and I wanted to change format of my storage service.I’ve already change something but I would like to make it better.I’ve found in the linux plugin configuration where lines which display the result are.My current conf for that : 15428   sub custom_usage_output {15429       my ($self, %options) = @_;15430       my ($total_used_value, $total_used_unit) = $self->{perfdata}->change_bytes(value => $self->{result_values}->{used});15431       my ($total_size_value, $total_size_unit) = $self->{perfdata}->change_bytes(value => $self->{result_values}->{total});15432       my ($total_free_value, $total_free_unit) = $self->{perfdata}->change_bytes(value => $self->{result_values}->{free});15433       return sprintf(15434           'Usage : %s / %s (%.2f%%)',15435           $total_size_value . " " . $total_size_unit,15436           $total_used_value . " " . $total_used_unit, $self->{result_values}->{p

743
S
M
MGRSteward *
asked in Platform
Restart/Reload not working after fresh install

Hello,I have followed the tutorials to install Centreon 22.10 on RHEL8.7.Using packages | Centreon DocumentationWeb And Post Installation | Centreon DocumentationFirewall enabled, I applied the rules (Secure your platform | Centreon Documentation)SELinux disabled (too many problems with it)I have only registered the Central Server with the common Linux SNMP template.I noticed errors when exporting the configuration (chmod errors). Below are the default permissions on the folder /etc/centreon-engine/I changed them all by apache:centreon-engine then no more errors.After starting all the services as described in the tutorial, I registered the server and exported the configuration with the options “Move Export Files” and “Restart Monitoring Engine”. I’ve tried Reload and Restart. No errors but the host and its services are not monitored. I’ve noticed that the uptime of the service “centengine” is not reset. If I restart the service manually, I will see the host and its services in “Pending

8463
M
G
germar1Steward *
asked in Platform
Poller not running on new installation

Hello,I’m currently working on getting a Centreon installation set up for the first time, and have followed the documentation for installation on Almalinux. After set up I can’t seem to get the default central poller to start, however the icon in the top left shows as green.Any assistance on this would be greatly appreciated. 

740
G
D
dakombayeSteward *
posted in Platform
Forget admin user password

Hello everyone! I forgot my centreon 22.04 web interface admin password. I want to reset the default password from command line. can you help me? please

12850
D
N
nicnictoutSteward ***
asked in Data collection
Debug bad formatted performance data

Hello,I see frequently ibd files growing on my DB du to bad formatted performance data collected (space added is the major issue).Searching thoose bad data is really painfull in broker logs.Is there any other way to identify easily thoose data? Thx

4604
N
D
DorianSteward *
asked in Data collection
"has been bloqued by CORS policy"

I would like to display some information from my Centreon on an HTML page, but an error persists in my browser console. Here is the error and my JavaScript code.  

3485
ponchoh
Centreonian
D
DorianLQSteward *
asked in Data collection
CORS policy

My company has a Centreon service (network equipment monitoring for the entire company) hosted locally. The monitoring information is visible on a WEB page.I would like to retrieve some information (state of certain network equipment/WEB pages) to display it to all staff.This is where an API comes in, initially I made a "curl" request to retrieve an identification token in order to contact the API.In a second step, I made a request with the token to retrieve all the monitoring information in JSON format.So far, everything is working.Now I would like to "automate" this process by making it accessible on a WEB page.I am using javascript code (see below) to query my API but it is not working. The code seems good but it is blocking on the server side.  I was given a suggestion to add a line in the file "/opt/rh/httpd24/root/etc/httpd/conf.d/10-centreon.conf", but it made no difference :    Header  set X-Frame-Options: "ALLOW-FROM http://your.url.com/"I also looked into the meaning of CORS,

3151
ponchoh
Centreonian
Y
YohanGSteward *
asked in Platform
Migrate 21.04 to 22.10

Hello ! I’m trying (my best) to migrate my Centreon 21.04.10 which I installed with the sources on debian (there was no packages for apt for debian back at that time) to a new server in the latest version using the packages but I can’t make it work.I don’t have external pollers, just a Central.I tried copying the databases and using the guide to import them (and start the upgrade process which go well) but the poller stop running the next day or if I restart it and I can’t make them start again. Si I tried to use clapi to export everything and import in the new server : the poller stopped running too. So I tried to import the clapi export without the config of the broker, poller, etc… Just the hosts, services, commands, timeperiods, users (by reseting their passwords to a longer one). I manualy edited the exported file in Notepad++ and removed the lines related to that, loaded the server back to a fresh state and imported the file. I can see the hosts in Hosts > Hosts, services, com

860
Y
C
Citeos RouenSteward *
asked in Data usage and Visualization
How do you export a list of unreachable host ?

Hello, I don’t know if it’s possible and I can’t seem to find a answer on the documentation.I would like to export in a csv format a list of all the non pingable host at a certain time.Thanks in advance for your feedback

8722
C
L
LEBRETONSteward ***
asked in Platform
Ceph RestAPI plugin pack : download old rpm on poller

Hello,I activated the Ceph RestAPI pack plugin and installed the centreon-plugin-Applications-Ceph-Restapi.noarch rpm (version 20221215-102705.el8 available on the repository).I declared a new host on one of my pollers, and when I update the poller, the rpm centreon-plugin-Applications-Ceph-Restapi installed by Gorgone is in version 20220727-130028.el8.Why is this not the latest version available on th repository?Thank you(Centreon 22.10)

461
ponchoh
Centreonian
goe
goeSteward *
posted in Data usage and Visualization
Monitoring graphs draw curves' peaks not with maximum Y-values

I have realized a strong effect on graph scales:On the web interface periodically measured mean values (e.g. INTERFACE_TRAFFIC / CPU Load ) are displayed with correct peaks (Y-values) only when specifying an observation time period of less than 6 ¾ hours (3645 minutes).Displayed maximum peaks shrink seriously (due to coarsening) the more the observed time period grows:1. 6 ½ hours:    668 mbit = 100 %2. 6 ¾ h hours: 569 mbit =   85 %3. 24 hours:      366 mbit =   56 %3. 1 week:           92 mbit =   14 %4. 1 month:         50 mbit =     7 %5. 1 year:            36 mbit =     5 %When checking for spare operating capacity, this can be quite deceptive.

1182
goe
W
websylvSteward *
asked in Platform
MSSQL Monitoring with domain account

Hello I try to configure the monitoring of an MS SQL 2014 always on clusterI become crazy i don’t understand why i cannot connect using a domain account :  # /usr/lib/centreon/plugins//centreon_mssql.pl --plugin database::mssql::plugin --hostname <clusterFQDN> --port 1433 --username <DOMAIN>\\<USER> --password <PASSWORD> --verbose --mode='connection-time'CRITICAL: Cannot connect: OpenClient message: LAYER = (0) ORIGIN = (0) SEVERITY = (78) NUMBER = (44)Server , databaseMessage String: Server name not found in configuration files.Server message number=18452 severity=14 state=1 line=1 server=WUNIDBKLIF4 text=Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. OpenClient message: LAYER = (0) ORIGIN = (0) SEVERITY = (78) NUMBER = (34)Server , databaseMessage String: Adaptive Server connection failedOpenClient message: LAYER = (0) ORIGIN = (0) SEVERITY = (78) NUMBER = (34)Server , databaseMessage String: Adaptive Server

13233
ponchoh
Centreonian
B
bakary.silueSteward *
asked in Platform
Centreon bi

Hello, I am Silue, a 2nd year student in system administration.I discover Centreon recently and I meet difficulties during the installation of Centreon Map and Centreon Bi.Can someone help me?

641
ponchoh
Centreonian
X
xinerysSteward *
asked in Platform
Open-ticket - Create ticket in command line

Hello !  I would like to create a ticket in the command line before create a eventhandler script. I use this synthax : /usr/lib/centreon/plugins/centreon_notification_centreon_opentickets_api.pl --plugin notification::centreon::opentickets::api::plugin --mode=open-service --api-hostname='IP' --api-port=80 --api-proto=http --api-username=admin --api-password='mypassword' --rule-name='Rule JIRA' --host-id=69 --service-id=355 --service-output='SNMP Table Request: Timeout' --service-state='UNKNOWN'  I’ve this error : Method not found I’m not sure, what is the “service-output” and someone know any solution ? 

2001
X
A
aalz0Builder *
posted in Platform
Adding contacts with CLAPI

Hi, I dont see the point of making obligatory to add a password when importing or creating the contacts by CLAPI and dont making it obligatory when creating by web manually…

340
A
W
WisonicSteward *
asked in Platform
Upgrade the Pollers from version 21.10 to version 22.04.

[English version in the next message]Salut,Il y a quelques mois j’ai mis à jour mes 4 pollers en version 21.10. Tous ont installé la 21.10 mais 2 d’entre eux sont restés bloqué à la dernière étape “Cleanup”. Comme la mise à jour avait l’air d’être quand même passé j’ai skip le cleanup sans trop y penser. Comme vous pouvez vous en douté j’ai maintenant des problème pour mettre à jour ces 2 pollers.Tout d’abord, je précise que la mise à jour du central et de mes autres pollers se sont bien passés, j’ai suivi la documentation. https://docs.centreon.com/docs/upgrade/upgrade-from-21-10/Pour mes 2 pollers à problèmes, j’ai ce retour quand j’exécute cette commande :yum install -y https://yum.centreon.com/standard/22.04/el7/stable/noarch/RPMS/centreon-release-22.04-3.el7.centos.noarch.rpmrésultat :Comme vous pouvez le voir sur la deuxième image, le poller bloque de nouveau sur le Cleanup, je suis obligé d’interrompre l’exécution. J’ai quand même essayé de continuer la démarche.après avoir yum

9125
omercier
Centreonian
L
leoSteward *
asked in Platform
Enhanced Interior Gateway Routing Protocol (EIGRP)

Hi,The network team asked me to monitor the BGP and the EIGRP of their routers, I found the BGP mode in the cisco standard plugin but not the EIGRP. So I check the other plugin but I couldn't find any plugin in the plugin pack manager who can monitor the EIGRP.Here are all the modes of cisco standard snmp: Does someone know if centreon can monitor the eigrp and if yes, how? Thank you in advance.

500
L
T
tntteamSteward *
asked in Platform
Event log page not working

Hello,I had a centreon 21.04 with event log page not working. I upgraded to 22.10 and noticed the bug is still here.I tried a fresh install with vmware ova and yet the bug persist.When you use the page /centreon/main.php?p=20301 it is not working at all. Filters using host name or service name or time ranges or non functionnal. All you can get is the list of all events not filtered, but when you click on next page, it ends up on blank page.The logs are here, you can see them on the Resources status page, but event log page is not working as intended. I made a video trying to explain this, if anyone has an idea. https://vimeo.com/781757064

4086
S
E
elementncSteward *
asked in Data usage and Visualization
Virtual metrics and Windows disk space plugin (NRPE) label

Hello, when I want to add a virtual metric to display the trend evolution of a disk space with metrics coming from Windows plugins and where this plugin (NRPE) generate disk space label like ‘C:/’ or ‘used_/’ are refused by the virtual metric config pageCentreon refuse to add the configuration for this virtual metrics. This is a known bug in Centreon but how to solve this ?

2712
omercier
Centreonian
A
aalz0Builder *
asked in Data collection
Create External BBDD with SQL

I am trying to implement HA, and I want the central server and central server 2 to store their data in an external, shared database.I have tried to make the connection to a SQL server and I get there but I get "MYSQL server has gone away",. I think this is because I am using a SQL server and not MYSQL, is this what is stopping it from working? Has anyone done or knows if it is possible to do what I am asking?Thank you very muchTranslated with www.DeepL.com/Translator (free version)

982
A
H
HatemSteward *
asked in Platform
Mathematica formula in Macros

Hello,I’m monitoring Switches that can be only one or stacks of 2 to 4 Switches. I’ tried to use custmon monitoring using OID to check temperature.the answer of snmpwalk gives Temp x 2 for every switch of the stack. I give an exemple of a 4 unit stack :[root@egp-super /]# snmpwalk -v3  -l authPriv -u admin -a SHA -A xxx -x AES -X xxxx 10.149.254.148 1.3.6.1.4.1.45.1.6.3.7.1.1.5.5SNMPv2-SMI::enterprises.45.1.6.3.7.1.1.5.5.10.0 = INTEGER: 92SNMPv2-SMI::enterprises.45.1.6.3.7.1.1.5.5.20.0 = INTEGER: 94SNMPv2-SMI::enterprises.45.1.6.3.7.1.1.5.5.30.0 = INTEGER: 94SNMPv2-SMI::enterprises.45.1.6.3.7.1.1.5.5.40.0 = INTEGER: 94 so the tempreture of the first is 92/2 = 46the forth is : 47I’d like to use a macro in which I choose the max number divided by 2 : which is 47 in our case.in other monitoring application, I used : ColumnMax[.1.3.6.1.4.1.45.1.6.3.7.1.1.5/2]Can you help me to find how I can do that in centreon macro.Thanks for your help

460
H
K
kozfelipeSteward **
asked in Data collection
How to handle stale process

What is the best practice to handle stale process from services?Most of my services have a 5 minutes polling, although some of them have their last check reaching hours.When I list process from centreon-engine they seem to be stuck even with max_execution_time set to 60sThese scripts are basically consulting large MIB tables which runs in 5 seconds average but for some reason they stack in the process pipeline. I’d like to schedule a script to cleanup those stuck process. Since I don’t want to mess with the system crontab, using a centreon service could be the best way to schedule it. How can I set the right permission to centreon-engine be killing these process though this script?  

4974
C
Centreon Lord Commander
V
VincentTSteward *
asked in Data collection
Netapp Restapi Quotas

Hello,Whe want to monitor quotas on our Netapp platform with plugin pack Netapp ontap restapi latest version (22.12.0).Whe find that the control does not return the entirety of quotas by vserver but just one vserver when whe use the filter-vserver=’’ or filter-vserver=’.*’. If whe indicate a vserver for filter-vserver, the quota informations for this vserver are well reported. Thanks for help.Have a good day.

422
C
Centreon Lord Commander
A
aalz0Builder *
asked in Data collection
Service templates inheritance BIG issue

Hi, I am migrating my monitoring configuration from NagiosCore and NagiosQL to Centreon, but I have a problem with the service templates with which I am quite desperate.Unlike with host templates (which you can add more than one template per host) in services, Centreon only lets you add one template.I have already seen that in Centreon this works using inheritance, but is there any other way to make it work by groups?As I said, I currently add to each service several templates which have an order that matters.I have a problem since for each line you see in the image below (these are all the possible combinations in my monitoring), I would have to create a lot of different "routes" duplicating templates.Let's see if I explain better with an example...If I want my template A to follow the following inheritance, A->B->C->D but then I want another service to follow the following inheritance A->E->C->D, with the Centreon inheritance system, I understand that I should creat

2124
A
J
jfmorenaSteward *
asked in Platform
Error 500 migrating Centron Server to Remote Server

Hello, I am trying to migrate a central center 22-10 remote to later add it to an existing plant. I get this error but I can't find anything on the Internet. Thanks a lot: /usr/share/centreon/bin/registerServerTopology.sh -u admin -t remote -h Central-IP -n Poller-namePlease enter the password of Central-IP:  Summary of the information that will be sent:  Api Connection:  username: admin  password: ******  target server: Central-IP  Pending Registration Server:  name: Poller-name  hostname: centreon  type: remote  address: IP_PollerDo you want to register this server with the previous information? (y/n): yMore information is required to convert your platform into Remote :IP_Poller : Please enter your username: adminPlease enter the password of IP_Poller:IP_Poller : Protocol [http]:IP_Poller : Port [80]:IP_Poller : centreon root folder [centreon]:Are you using a proxy ? (y/n): n2022-12-21 13:20:25+01:00 - ERROR - IP_Poller: {"code":500,"message":"The address '' of '' is not valid or not

4582
J

Badge winners

  • First Topic Created
    Dimbyhas earned the badge First Topic Created
  • Five Replies
    Leila_Rhas earned the badge Five Replies
  • Five Replies
    rpjhas earned the badge Five Replies
  • First Reply
    elliteharryhas earned the badge First Reply
  • First Wish Posted
    Torstenhas earned the badge First Wish Posted
Show all badges
Terms & ConditionsCookie settings