Skip to main content

Data collection

This forum is about how to configure Centreon to collect relevant monitoring data from your infrastructure, typically using monitoring templates and auto-discovery engine.

  • 432 Topics
  • 1,616 Replies
433 Topics
L
LudoKSteward *
asked in Data collection
Total access point: 0

Hello everyone,I’ve been testing Centreon with the IT-100 license and am trying to manage my Aruba Instant On 1960 switch. However, I’m encountering some issues. Specifically, I’m unable to retrieve any information from the switch.The switch is connected, and the ping works fine. However, when I try to retrieve the CPU usage, my new service called "Aruba1_cpu" uses the “Net-aruba-Instant-Ap-Usage-SNMP” model, but the status shows:"OK: total access points: 0."Could anyone help me understand why this is happening and how I can resolve it?

311
C
Centreon Lord Commander
Stéphane LE CAËR
Stéphane LE CAËRSteward **
asked in Data collection
Performance issue with Centreon's database

Hello,Since upgrading to Centreon 23.10 (since 21.10), I've been experiencing frequent slowdowns in the Web UI.From time to time, I have to restart the Centreon server to restore service.Analysis has shown that a very specific request is the cause. This query crushes the performance of the MySQL server. It seems that the indexes are not being used (FULL SCAN).The query is attached.Can anyone help me identify the cause, usage or process that triggers this query?Here is the SQL request SELECT SQL_CALC_FOUND_ROWS DISTINCT 1 AS REALTIME, resources.resource_id, resources.name, resources.alias, resources.address, resources.id, resources.internal_id, resources.parent_id, resources.parent_name, parent_resource.status AS `parent_status`, parent_resource.alias AS `parent_alias`, parent_resource.status_ordered AS `parent_status_ordered`, parent_resource.ad

2017
L
Centreonian
T
tgtSteward *
asked in Data collection
Mariadb list hosts and associated host group

Hello,I wish to extract from Mariadb all hosts with their hostgroup.Is someone can help me ?

311
C
Centreon Lord Commander
Js Oger
Js OgerSteward *
asked in Data collection
Veeam Monitoring for AHV

Hello,I would like to know if anyone has managed to supervise backup jobs with Veeam for AHV.I supervise my veeam backup jobs through the NRPE plugin but only the hyper-v and vmware jobs appear.Thank you in advance for your knowledge

632
Js Oger
C
c2s_talanSteward *
asked in Data collection
Cannot install NRPE4 connector on ALMA Linux 8.10

I am following the documentation: https://docs.centreon.com/pp/integrations/plugin-packs/procedures/operatingsystems-linux-nrpe4/ But when I try to install the connector on ALMA Linux 8.10 with the following command:dnf install centreon-pack-operatingsystems-linux-nrpe4 I get the following error:No match for argument: centreon-pack-operatingsystems-linux-nrpe4Error: Unable to find a match: centreon-pack-operatingsystems-linux-nrpe4  PS: I am trying to monitor Linux RHEL services launched with systemdThank you for your help.Regards.

624
C
R
Richard23Steward **
asked in Data collection
Curl avec api-key

Bonjour,Comment interroger une API avec une clé API svp , et récupérer une valeur svp.en CLI pas de soucis :Mais impossible dans le plugin http-jason-content :  j’ai une erreur 401,ou mettre le clé aPI svp ?Merci d’avancecordialement

2846
omercier
Centreonian
elyes
elyesSteward **
asked in Data collection
centreon_protocol_http

HelloNeed a Help How to interprate this comman /usr/lib/centreon/plugins//centreon_protocol_http.pl     --plugin=apps::protocols::http::plugin     --mode=expected-content     --hostname='******************l'     --proto='http'     --port='80'     --urlpath='/app/*****************/'     --critical-content='%{content} !~ /<title>**********<\/title>/mi'     --http-backend='curl'     --curl-opt='CURLOPT_ACCEPT_ENCODING => gzip'OK: HTTP test(s) | 'size'=1183B;;;0; 'time'=0.042s;;;0; 

1324
vcoum
Centreon Lord Commander
T
tojaSteward *
asked in Data collection
network::cisco::standard::snmp::plugin vPC Status - how to filter host links?

HiI am trying to filter out host links that are not used so that they are not displayed, but the usual filtering options (--filter= or --exclude=) are not working for me.Does anyone have any tips on how I could filter out unwanted host links?My command: /usr/lib/centreon/plugins//centreon_cisco_standard_snmp.pl --plugin=network::cisco::standard::snmp::plugin --mode=vpc --hostname=xxxxx --snmp-version='2c' --snmp-community='xxxx'   --verboseOutput: WARNING: vPC domain '12' host link 'port-channel31' operational status: downStar - host link 'port-channel100' operational status: downStarFor example I would like to filter out port-channel31 and port-channel100.

851
C
Centreon Lord Commander
N
Neo-HostingSteward *
asked in Data collection
Self Monitoring failures on new VM install upgraded to latest version

Hi all, I recently did an install of the free edition of Centreon. All I’ve done was install the VM and update everything to the latest versions and now I’m receiving a few errors in the services section and a bunch if unknowns. The first is for proc-postfix and is CRITICAL: Number of current processes running: 0. I suspect this might just because postfix isn't running and probably isn't a big issue.The other is for Connection-Time and is CRITICAL: Cannot connect: Access denied for user 'centreon-engine'@'localhost' (using password: YES). I also see this in a large number of the unknown issues. Would anyone be kind enough to point me in the right direction on how to fix this? Thanks

1291
C
Centreon Lord Commander
D
danrimerSteward *
asked in Data collection
Having trouble connecting to MSSQL 2014 using App-DB-MSSQL-Sql

Hi I’m having trouble connecting to my MSSQL instance. My server is version 2014, ie SQL Server 12. I enter all the details correctly in Configuration/hosts/hostsconfiguration When Centreon tries to poll the server, it fails with this error:  I’ve tried setting up the freetds.conf in /etc with the following:/etc/freetds.conf​​​​​I get the following error from the polls:UNKNOWN: Cannot connect: OpenClient message: LAYER = (0) ORIGIN = (0) SEVERITY = (78) NUMBER = (44)Server , databaseMessage String: Server name not found in configuration files.OpenClient message: LAYER = (0) ORIGIN = (0) SEVERITY = (78) NUMBER = (34)Server , databaseMessage String: Adaptive Server connection failed The command is shown as:/usr/lib/centreon/plugins//centreon_mssql.pl --plugin database::mssql::plugin --hostname='192.168.100.101' --port='1433' --username='username' --password='password' --mode='databases-size' --filter-database='^(?!(tempdb))' --filter-database-state='' --datafiles-maxsize='' --logfiles-ma

1693
D
M
MickaelSteward **
posted in Data collection
Centreon MAP - More basic shapes ?

Hello,Today in the basic shapes there is only a square, a circle, a triangle and a text box. Is it possible to add other basic shapes in MAP without adding an image?  THANKS 

672
M
G
GM-almSteward *
asked in Data collection
Discovery Interfaces Fortinet

Bonjour, Lorsque j’effectue un scan discovery(plugin Fortinet Fortigate) des interfaces d’un FW Fortinet je souhaiterais obtenir un résultat type : Traffic-portX-”description_interfaceX” A part la variable par défault $name$ (1.3.6.1.2.1.2.2.1.1 (ifName)) je n’obtiens aucun résultat lors du scan Pour l’instant j’ai tenté un scan avec les OID suivants sans résultats1.3.6.1.2.1.2.2.1.2 : Description Interface (ifDescr)1.3.6.1.2.1.31.1.1.1.18 : Alias de l’interface (ifAlias)1.3.6.1.4.1.12356.101.6.3.1.2 : Description de l'interface (fortinetIfDescr).1.3.6.1.4.1.12356.101.6.3.1.3 : Alias de l'interface (fortinetIfAlias) auriez vous une solution ? Merci

551
C
Centreon Lord Commander
A
acecileSteward *
asked in Data collection
Network trafic check with custom oids

Hello, I'm planning to leverage Linux TC queues to be able to implement trafic from/to a specific IP address in Centreon.My primary idea is to be able to graph each iSCSI multipath connection independently.I plan to rely on this project extending SNMPd with custom OID providing metrics per TC queue:https://github.com/mum4k/tc_reader/ It provides two modes, one showing metrics for a single queue and another one aggregating two queues together to emulate input/output. Format is described like this:myOID data will be in this hierarchy:myOID.1 - tcIndexLeaf                   - Stores integers, the SNMP indexes assigned to Qdiscs and Classes.myOID.2 - tcNumIndexLeaf                - Stores an integer, the count of indexes assigned to Qdiscs and Classes.myOID.3 - tcNameLeaf                    - Stores strings, the names of Qdiscs and Classes. Names are in the form "eth0:2:3", which means interface eth0, Qdisc 2, Class 3.myOID.4 - sentBytesLeaf                 - Stores counter32, the sent byt

201
C
B
Bigred38Steward **
asked in Data collection
Error open connection modbus

Good morning,I would like to make modbus requests with centreon.But when I want to run my request, I get an error UNKOWN: Unable to open a connection at TCP.pm line 56.I think I'm missing a few things.

378
B
E
elbatejSteward *
asked in Data collection
monitor systemd service with snmp

Hello,Is there a way to monitor systemd service from linux servers with snmp ?Thank you for your help

1301
omercier
Centreonian
N
NoamSteward *
asked in Data collection
Question about Linux-SNMP-Uptime service

Hello everyone, i have a small problem that impact only a few of the hosts that i monitor.The most blatant are “Server1” and “Server2” (cf pictures)Server 1 and 2 both have as a check command “Linux-SNMP-Uptime” (defined by their hostgroup) However they do not behave exactly like other in their hostgroup neither are they behaving like each other, and i cannot understand why. As you can see in this image, Server one (sometimes) says that the warning threshold is wrong, and Server2 that the uptime is Critical for being 465 days The problem is that i never inputed any of these weird warning values for server 1 and other servers with as much uptime as Server2 do not show any critical state.Here we can see that Server1 command act as if some weird values are used to check warnings and critical states.Server2 seems to have regular options.So There is what they show half of the time , whether shown as down or in critical status because of something i do not understand, however, sometimes they

1667
C
Centreon Lord Commander
J
JeanBruderSteward **
asked in Data collection
AS400 - Check jobs in subsystems

Dear community,We would like to test whether a certain number of jobs with known names are running in a subsystem. Example: EDIGEDA should be running in ROBOT.We would also like to test whether at least 1 job is running in a sub-system. My idea was to test via :  --filter-subsystem-name=‘^SUBSYS$’ --filter-subsystem-library=‘LIB’ --critical-status=0 Is it necessary to test a warning state in this case?Finally, is it possible to manually create all the tests in the CLI, as we will have a large number of them on several systems?Thank you in advance for your answers,Best regards,Jean

1603
ltirand
Centreonian
K
KalosSteward *
asked in Data collection
var/lib/mysql growing 5GB per week

Hi at all,the volume var/lib/mysql growing 5GB per week. I gave it more space two weeks ago, from 60GB to120GB. This is the graph in 4 months:  Two weeks ago the volume filled up, this caused the db logs table to be deleted. I recreated the table, but now it’s not partitioned. So, I have two question: Why the var/lib/mysql volume growing so quickly?  Is it a problem if the logs table is not partitioned? I'm waiting for a response, thank you very much!! 

773
K
K
katskaSteward **
asked in Data collection
Aruba stack member check with check using centreon_generic_snmp.pl

Hi,As the official Aruba stack check does not work with the Aruba switches we have, I tried to create a command using centreon_generic_snmp.pl. The command below works just fine on the command line:/usr/lib/centreon/plugins//centreon_generic_snmp.pl  --plugin=apps::protocols::snmp::plugin --hostname=1.2.3.1 --snmp-version='3' --snmp-username=polling --authpassphrase=uaaa --authprotocol=SHA --privpassphrase=uaaa --privprotocol=AES  --verbose --mode=string-value --oid=1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.14.1  --map-values=''CCCAAABBB2'=>OK' --map-value-other='DOWN' --format-ok='Stack member is: %{details_ok}' --format-details-critical='Stack member status is %{value}' --critical-regexp='DOWN' --verboseOK: Stack member is: OK When I add it to web, I get this error:argument alone at (eval 28) line 189. Command itself in web is:$CENTREONPLUGINS$/centreon_generic_snmp.pl  --plugin=apps::protocols::snmp::plugin --hostname=$HOSTADDRESS$ --snmp-version='$_HOSTSNMPVERSION$' --snmp-username=$

1755
K
B
Black07cd26Steward *
asked in Data collection
Check with only ping request

Hello !I just set up the lastest version of Centreon, i read a lot of “how to” manual but i’m stuck on a basic thing ..I just want to set up supervision with only ping, i do not need anything else for the moment, i tried many differents way but i can ‘t ping hosts i added.I can ping them from the server with ssh commands, my virtual server do Central and pollerPlz someone can give me the right way to set it up ?Thanks

29510
C
Centreon Lord Commander
B
ben49Steward *
asked in Data collection
Plugin Linux-SSH, cmd-return : get output of a bash script

Hello,I have the following command :/usr/lib/centreon/plugins//centreon_linux_ssh.pl --plugin=os::linux::local::plugin --mode=cmd-return --hostname='1.2.3.4' --ssh-backend='libssh' --ssh-username='my_user' --ssh-password='' --ssh-port=''  --exec-command='/home/my_user/my_script.sh'  --exec-command-options='' --manage-returns='%(code) == 0,OK,All is fine#%(code) == 1,WARNING,Little problem#%(code) == 2,CRITICAL,Big problem#,UNKNOWN,Command problem' --verboseI have no problem with this command, but I’m not fully satisfiedMy script (my_script.sh) returns one line of text in all cases, and I want to get this output in --manage-return optionHow can I do this?Many thanks for your help!

1361
C
Centreon Lord Commander
K
katskaSteward **
asked in Data collection
Fortigate Fw SSLVPN users count plugin

Hi,Could you please add plugin to monitor the number of SSLVPN users on Fortinet Fortigate. If you need snmpwalk let me know. hen I can send it via email.

983
K
B
btrocmeSteward *
asked in Data collection
ACLs are cumulative

Hello,We want to give right on some users : to add/modifiy some hosts/services for a categories of host to see anothers hostsThe fact is, when a user havea “readonly” in ACL to a ressources “A”, and “write” on another ACL to a ressources “B”,the ACLs are cumulative so they have the write right to ressources “A”.Regards,

111
C
Centreon Lord Commander
pierre1
pierre1
asked in Data collection
mxtool to find a spf record

Hello,I’d like to know if collections can be used to perform the following requestConnect on https://mxtoolbox.com/ Write spf:google.com on the ‘Domain Name’ box Read the line ‘v=spf1 include:_spf.google.com ~all’ At the end, the Centreon measurement will compare this result with the expected valueThanks, 

503
pierre1
A
aramponSteward *
asked in Data collection
Data_bin compression

Bonjour, Notre base de données devient vraiment volumineuse et difficile à gérer au niveau des backups (+300Go). Nous souhaitons conserver notre rétention par défaut (1 an)Nous avons l’idée de mettre la table data_bin qui prends 99% de cette espace en COMPRESSION via mariadb ALTER TABLE data_bin PAGE_COMPRESSED=1;Est ce que Centreon supporte cette modification coté BDD, sensé être totalement transparente coté applicatif ? Nous sommes sur des SSD et les prérequis sont validés. Merci 

2538
B

Badge winners

  • First Wish Posted
    bjominhas earned the badge First Wish Posted
  • First Topic Created
    bjominhas earned the badge First Topic Created
  • First Wish Posted
    Horst Kitschhas earned the badge First Wish Posted
  • First Reply
    makhas earned the badge First Reply
  • First Topic Created
    makhas earned the badge First Topic Created
Show all badges
Terms & ConditionsCookie settings