Skip to main content

Platform

This forum is about how to administer a Centreon Platform: installation, software upgrades, backups or anything else related to platform operations.

  • 1,670 Topics
  • 5,270 Replies
1669 Topics
A
ahartungSteward ***
asked in Platform
Centreon email mailbox check

Hello,times a question so in the round.We used an external email box where our alarms from centreon arrive.In rare cases it happens that emails are sent, but there is a problem with the external mailbox.Is it possible to build a check that sends an email e.g. always 0800 in the morning.so that you know, ok my mailbox still works.Emails arrive.

2311
sduret
Centreonian
G
GCHARDINSteward **
asked in Platform
Problem with script check

Dear centreon users,i’m currently facing an issue where script check run by centreon engine do not work properly.Script are used to check disk with wmi. Running script from command line return expected behavior (ie return code 0 or 1 or 2 depending results).While running via centreon, it not works an always return “unknown state”.Those script are working correctly from another centreon server w/ same version.Can someone help ?Here some debug output from centengine.debug :** Running async check of service 'rik-check-wmi-disk_C' on host 'server.domain.local'...[1651075486] [1950] check_service_check_viability()[1651075486] [1950] Making callbacks (type 13)...[1651075486] [1950] Callback #1 (type 13) return (code = 0)[1651075486] [1950] Checking service 'rik-check-wmi-disk_C' on host 'server.domain.local'...[1651075486] [1950] get_raw_command_line_r()[1651075486] [1950] Raw Command Input: $ERICAPLUGINS$/check_wmi_disk.sh -H $HOSTADDRESS$ -U '$DOMAINUSER$' -P '$DOMAINPWD$' -c $_SERVICECRIT

4054
G
A
Alan BlanchardSteward *
asked in Platform
Internal server error after update from 21.04.10 to 21.10

Hello everyone,I'm trying to update Centreon 21.04.13 by following this procedure: Montée de version depuis Centreon 21.04 | Centreon DocumentationEverything is working fine during the installation but when it is finished and I try to login, I get the following error: internal server errorI’ve checked the Centreon logs but I could not find anything related to this error.Thank you in advance for your help !Kind regards

128110
A
N
NathanSteward *
asked in Platform
j'ai cette erreur SQLSTATE[HY000] [1045] Access denied for user 'root'@'localhost' (using password: NO)

Bonjour,J’ai réinstaller centreon, j’ai bien effectuer les maj avec : Yum updatemon ip est bonne. Je me suis donc connecter sur le serveur web, est au demarrage de celle ci on m’affiche cette erreur, SQLSTATE[HY000] [1045] Access denied for user 'root'@'localhost' (using password: NO)Pouvez vous m’aider ?Merci d’avance

1951
itoussies
Centreonian
V
vraicaSteward *
asked in Platform
snmp v3 ubuntu

Bonjour, j’ai une autre question je ne comprend pas comment ajouter un host snmp v3 (os=ubuntu) j’ai cree un utilisateur avec cette commandenet-snmp-create-v3-user -ro -A STrP@SSWRD -a SHA -X STr0ngP@SSWRD -x AES snmpadminj’ai fait les teste snmpwalksnmpwalk -v3 -a SHA -A STrP@SSWRD -x AES -X STr0ngP@SSWRD -l authPriv -u snmpadmin localhost | headping centreon to 10.100.30.14 is ok 

14571
K
J
Jose Francisco MendozaSteward *
asked in Platform
Messages using Postfix on Centreon dont Work

Hi. I need your help to resolv a problem with Postfix on Centreon to send alerts via email.Iam sure There is something wrong in my configuration because i still can´t send by email the alerts.Can help me with this issue. Regards.  

80812
K
P
poojaSteward **
asked in Platform
why is my global-disk template skipping partitions?

 my global-disk snmp template doesnt show all the disk partitions of the server Centreon outputServer output 

52114
K
I
idiSteward *
asked in Platform
appel api centreon_realtime_services

Bonjour ; Je cherche à faire un appel api "action=list&object=centreon_realtime_services" en utilisant un user configurer en autologin.du coup mon url ressemble à ceci: https://xxxxxxx/centreon/api/index.php?action=list&object=centreon_realtime_services&viewType=all&fields=state&search=xxxxx&searchHost=xxxxxxxx&autologin=1&useralias=xxxxxxxx&token=xxxxxxx mais j'obtiens un retour "unauthorized".avez-vous une solution sans passer par le token?

2616
I
T
thierry-quanteoSteward *
asked in Platform
SNMP - Check dossier racine linux uniquement

Bonjour à tous,J’ai 2 partitions sur 2 disques différents sur mon serveur Linux : un dossier racine /un dossier /var/lib/jenkinsle check disk (en SNMP je précise) vérifie correctement le /var/lib/jenkins par contre le check sur le dossier racine / prend aussi le /var/lib/jenkins (ce qui me semble assez logique :-) )Y a t-il moyen d’exclure le /var/lib/jenkins dans le check du dossier racine ?Merci pour votre aide,Thierry

1711
K
P
poojaSteward **
asked in Platform
how to monitor remote mount point in centreon?

I am not being able to monitor these remote filesystems in centreon, please help  

3113
P
S
sullyanfSteward *
asked in Platform
Debian 11 mail server monitoring problem [21.10]

Hello everyone,I am writing to you as a young IT student learning supervision with Centreon 21.10 (IT-100 license) and stuck with a problem I don't understand.As part of my work, I have to supervise 3 Linux Debian 11 servers:- An Apache 2 web server- A MariaDB server- A mail server with iRedMailThese 3 servers are installed by me.I was able to add without problems the first two to Centreon with the help of the very well written documentation and the Linux-snmp plugin (and those intended for the various services).However, the third one has a problem that I cannot explain. It adds itself well to Centreon, is detected as "available" but the ping is marked as "alert" with a loss of 20% while the other values of the linux-snmp plugin remain as "unknown".Considering that this third server is configured exactly the same way as the 2 others, both at system and snmp service level. The ping is not disturbed when I test it directly via the RHEL terminal (which hosts my Centreon server).I really d

2165
K
S
SservaisSteward **
asked in Platform
Erreur Upgrate centreon apres Migration depuis une plateforme Centreon 3.4

Bonjour,J'ai récemment voulu Migré mon Centeron qui était en 3.8 en version 21.10 ,J'ai donc suivi à la lettre tout en ajustant certaines informations liées à mon environnement / infrastructure. Je suis donc arrivé au point où il faut forcer l'édition de la version via l'interface web.j'ai donc suivi et copié le répertoire d'installation là où il faut et j'ai commencé.je me suis donc retrouvé face à une erreur me disant que la base de données existait déjà. Je me suis dit qu'il a juste eu du mal à récupérer et a détecté que c'est un montage de version donc j'ai mis l'url au lieu de install.php mit upgrade.php et son lancé jusqu'à ce que je me retrouve sur l'erreur"Update-DB-20.04.0-beta.1.sql Line 22: SQLSTATE[42,000]: Syntax error or access violation: 1118 Row size too large. The maximum row size for the used table type, not counting BLOBs, is 8126. This includes storage overhead, check the manual. You have to change some columns to TEXT or BLOBs "j'ai fait le changement suivant et re

2862
K
quentinrey
quentinreySteward **
asked in Platform
Pollers and Central not running after upgrade from 21.04 to 21.10

Bonjour,Je viens d’effectuer un upgrade de notre Centreon et des Pollers (1 Central et 2 Pollers).La montée de version 20.10 à 21.04 s’est passée correctement.Par contre j’ai un soucis au passage de la 21.04 à la 21.10 (Doc suivie : Montée de version depuis Centreon 21.04 | Centreon Documentation)Après la mise à jour, l’export de la configuration et la relance des services, mon Central et mes Pollers semblent ne pas communiquer.ENGLISHHello,I have just upgraded our Centreon and Pollers (1 Central and 2 Pollers).The upgrade from version 20.10 to 21.04 went well.On the other hand I have a problem with the upgrade from 21.04 to 21.10After the update, the export of the configuration and the restart of the services, my Central and my Pollers seem not to communicate. Les versions de leurs centengine respectifs ne semblent pas bons, et je n’arrive pas à savoir pourquoi cela ne communique pas, et je ne sais pas trop quelles logs regarder.L’état des différents services sur le Central :ENGLISHTh

45555
K
B
brian2022Steward *
asked in Platform
No plugin pack found appears after 7 days - Problems!

Hello, I seen another user here has posted this same exact problem. It was marked solved however it was not not resolved. Everything was working perfectly we were using the platform with plugins and building out the monitoring. Then out of nowhere we get errors “ No plugin pack found” and Oops, something went wrong” Looking at output the server requests are getting 404 errors for page not found when attempting to connect to apo.imp.centreon.com resources I have been through all the troubleshooting guidance from Centreon in regards to identifying the source problem. We are moving towards acquiring 500+ host licenses, while we are working on that we are running IT-100 licensing at the moment. This makes me believe it is not our instance that's the issue here.Would love some guidance as this may be a deal breaker for our organizational use  Troubleshooting:  /etc/centreon/license.d/epp.license - License file is validToken installedNetwork is reachableNO PROXY IS USED  Centreon version:cen

5141
B
G
gespadaBuilder ***
asked in Platform
Use a resource on a template

Hello,We have PostgreSQL clusters, which each postgreSQL instances have his LUN mounted who present his folder.So i try to develop a host template with a macro DBNAME who is used on a service template to check specificaly the file system of one database and i want to use standard command from the centreon-plugins Linux NRPE3.Context :I set a new Resource :$DBNAME$ = $_HOSTDBNAME$On my Host Template i define my macro :$_HOSTDBNAME$ = xxxxxxdb01On the Service Tempate Disks inherit from OS-Linux-Disks-NRPE3-custom, i use the macro FILTERMOUNTPOINT$_SERVICEFILTERMOUNTPOINT$ = /data/postgres/$DBNAME$In my idea nagios mechanism could display the value of DBNAME from the Host macro, but it doesn’t work.It’s possible to use a resource at service template level ? or it just used at the command level ?Regards,Greg

2284
G
P
pravinkSteward **
posted in Platform
AIX NRPE

Hello, I am using the Centreon Community version and want to test AIX monitoring using NRPE.  Please let me know if anyone has tried this scenario. 

1993
K
M
MercureSteward *
asked in Platform
Collector not upgrading since update to centreon 21.10.5

Hello, I’ve upgraded my centreon from 20.10.4 to 21.10.5 recently,Everything seems to work (alerts are OK when a host is down) but when I try to “export the central poller config” (when I make a modification, like changing an IP or something) : it's stuck at 0%Any idea?Progression (0%)   Préparation de l'environnement... OK Génération des fichiers...

2896
K
Intence-Tech
Intence-TechSteward **
asked in Platform
Centreon Raspberry Poller

Hi ! I'm looking for feedback on using Raspberry pi to make remote pollers.I have my central in version 21.10.5, can I install a poller in 21.04 which will be compatible with central via this tutorial? https://www.sugarbug.fr/framboise/full_raspcentreon4_2104/

2991
kduret
Centreonian
A
Air1Steward *
asked in Platform
SNMP Traps - Documentation not accurate

Hello,I installed Centreon version 21.04 and everything works perfectly. I wanted to use the SNMP Trap and that's when a problem occurs, my traps don't work. I went to the debug pagehttps://docs.centreon.com/docs/21.04/monitoring/passive-monitoring/debug-snmp-traps-management/#detailed-diagramand when I saw the diagram at the bottom I saw that I had to configure a path to a centcore.cmd file, unfortunately I don't have this file and the documentation is not accurate in this case.I wanted to know if there was a method I didn't find to still get the traps working.Thanks

2281
K
sdouce
sdouceBuilder *
asked in Platform
Unable to add new curve blank page

It seem that since update to 21.04.12 , it s impossible to access to curves configuration in perfwhen i tried to add or modify a curve ==> Blank Page Any idea ????

2312
sdouce
C
CrowleySteward *
asked in Platform
NVIDIA GPU SMI SSH

Hello all,I’m having trouble with the new NVIDIA GPU SMI SSH plugin (hardware::devices::nvidia::gpu::smi::plugin).I would like to monitor the GPUs of my ESXi but the authentification doesn’t work.I tried with the ESX root account[root@Centreon plugins]# ./centreon_plugins.pl --plugin=hardware::devices::nvidia::gpu::smi::plugin --mode=stats --hostname=EsxName --ssh-username=root --ssh-password='MyEsxRootPWD' --ssh-backend=libssh --verboseUNKNOWN: auth issue: Access denied for 'password'. Authentication that can continue: publickey,keyboard-interactiveI also tried with the Centreon user because the documentation use this user. But because that user is not present on my ESXs I don’t understand how it could works[root@Centreon plugins]# ./centreon_plugins.pl --plugin=hardware::devices::nvidia::gpu::smi::plugin --mode=stats --hostname=EsxName --ssh-username=centreon --ssh-password='' --ssh-backend=libssh --verboseUNKNOWN: auth issue: pubkey issue If anyone have tried this plugin before I wo

3492
C
L
LEBRETONSteward ***
asked in Platform
Howto install Centreon on AlmaLinux

Hello,Howto install Centreon on Almalinux ?Thanks,Philippe

7601
K
D
DaviddSteward *
asked in Platform
Récupération métrique Windows Server

Bonjour, Je dispose plusieurs machines Windows Server distante.Je mets en place le modèle OS-Windows-SNMP-Custom. Je récupère bien le ping mais pas le cpu mémoire et swap (UNKNOWN: SNMP Table Request : Timeout)J’ai autorisé le port UDP 161 entrant et 162 sortant. Le cpu est ok mais la mémoire et le swap reste en UNKNOWN: SNMP Table Request : Timeout Ce que je comprends pas c’est que certains Serveur distant Windows sont bon 

14054
M
F
Francis DOUNGASteward **
asked in Platform
NTLMV2 MSSQL PLUGIN CENTREON

Hello Community How to use NTLMV2 protocol using mssql plugin in centreon? I set in global section in the freetds.conf file ‘use ntlmv2 = yes’ but my connection doesn’t work. My server accept NTLMV2 connetion but I think that centreon plugin mssql use NTML  connection. Francis

1731
sims24
S
seaevSteward *
asked in Platform
Hyper-V monitoring issue

Hello everyone,I have an issue when i use Hyper-V 2012 NSClient++ NRPE, in the documentation it’s needed to install the following package :yum install centreon-nrpe-pluginbut on my centos 7 (centreon iso installation), i have the following error :“no packages available”.I have installed Centreon 21.10 yesterday and have updated all the packages.do i miss something ?Thanks,

2804
S

Badge winners

Show all badges
Terms & ConditionsCookie settings