24.04 Service Pack - Announcement
Learn more about the Centreon platform.
Recently active
Hi There,Recently, the check period of some of my services has been changed. We have modified it from 5 minutes to 1 hour. After that, Some charts have been disappeared. I would like to notice that the folowing actions were done :Parameters > Data > Rebuild RRD Database Force the check of concerned services in order to generate charts Has anyone an idea what is happened ?
Hello, When I am trying to use Blocked-Packets-Per-Interface feature on pfSense, I get the following error : UNKNOWN: Need to specify OIDs. Same when I try to launch the following command (from centreon documentation) :/usr/lib/centreon/plugins/centreon_pfsense.pl \ --plugin=apps::pfsense::snmp::plugin \ --mode=pfinterfaces \ --hostname='10.0.0.1' \ --snmp-version='2c' \ --snmp-community='my-snmp-community' \ --filter-name='em.*' \ --warning-traffic-in-block='80' \ --warning-traffic-out-block='90' \ --critical-traffic-in-block='80' \ --critical-traffic-out-block='90' \ --use-new-perfdata I activated my IT-100 license and installed pfSense plugin. Any idea of what could be the issue ? Thank you.
So i’m trying to set up a Centreon server (version 22) and i want to use SNMPv3 but i don’t understand how i’m supposed to use it.I want to use the Auth Priv mode but when i want to add a host it doesn’t prompt me with a “username / password” or anything, it’s just the community and the version.I can’t find any documentation about SNMPv3 with Centreon (apart from the “discovery” part but that’s with the paid license)
Hi,Is there any users of the Centreon SaaS solution here? Especially users which went from on-premises to SaaS?Can they share their experience? Pros and cons?I know the pros and cons of on-premises vs. SaaS in general, but I wonder about this for Centreon particularly.
Recently I have imported via CLAPI .cfg configuration files from Nagios to Centreon, when exporting the configuration I got the following error:However when I go to the generated template, I see that it is correctly, in the 2d_coord section the data has been entered.What can this be due to? How can I solve it?
Hello,I would like to ask for help for an on-premise Centreon website issue.If multiple Centreon browser tabs are open (logged on), then the session is randomly but frequently closed.The browser shows again the logon screen, but then after re-logon forgets where it was.It happens quite randomly and only in Centreon webpage.All other internal websites can work well in the same time.It is the situation also from site network and also from home office (via VPN)If we keep only one logged on tab open, it works well continuously.It is not a browser-connected issue, it happens in Chrome, Edge, etc.Have anyone detected the same yet?Thanks in advance.
Hi, Is it possible when a host get down to receive only the mail from the host and not the mails from services associate to this host ?Like for the services to send a mail they can check if the host is up or down.If the host is down don’t send a mail | if the host is up send a mail. Regards,
Hi, Regarding to the title, now we are using the Centeron version 2.8.32.because of the platform migration plan has been taken in action within 2 months.So, we are planing to install Centeron service to the brandnew platform, which is Red Hat Enterprise Linux Server release 7.3 (Maipo).But, we have a certain issue to solve for migration, that is we do not have the package of Centeron version 2.8.32.So that we would like to ask this community to provide us, if there are any certain link to provide us to obtain the Centeron version 2.8.32.or if it is still difficult to provide us such a link, then we need to ensure Centeron package compatibility matching between 2.8.x and Centreon 3.4 as it is described in the compatibility table below the link.Software support policy — Centreon 2.8 documentationBest Regards,
Hello,I have a problem in the display of the graphs (see the image in attachment), it seems that for several ten minutes (sometimes it is for 2 hours) the service does not respond, there is no logic and this concerns all services. The problem is suddenly several weeks ago on all graphics. Do you have any idea how to solve it ?
Hi there, i just very freshly did the update from 22.04.7 to 22.10.0 on a Centos7-Basis coming from 20.04-ISOs. After this the “Resource Status” is completely emtpy and showing 0 Hosts and 0 Services being set to display “All” - Funy thing though - the deprecated pages work and show all the missing Hosts and Services. please advise asap - thx RegardsTimo
Hello,Can we use Rest Api v2 for Centreon 19.04.20 ?Thanks.
Hello,I try to configure discovery rules for Windows disks with nsclient but when i launch discovery, i have this error : No services found in discovery responseHere gorgoned.log2022-11-17 12:30:28 - DEBUG - [autodiscovery] Event: [ACK] [svc-disco-fc64a8e4:39-37-64] {"data":null,"code":0}2022-11-17 12:30:44 - DEBUG - [autodiscovery] Event: [SERVICEDISCOVERYLISTENER] [svc-disco-fc64a8e4:39-37-64] [] { "code": 0, "data": {"message":"commands processing has started","request_content":[{"timeout":90,"command":"/usr/lib64/nagios/plugins/check_centreon_nrpe3 -H tagersrv -p 5666 -t 30 -u -2 -P 8192 -c check_centreon_plugins -a 'os::windows::local::plugin' 'list-storages' ' --disco-show'"}]} }2022-11-17 12:30:44 - DEBUG - [autodiscovery] Event: [SERVICEDISCOVERYLISTENER] [svc-disco-fc64a8e4:39-37-64] [] { "code": 0, "data": {"metadata":null,"message":"command has started","command":"/usr/lib64/nagios/plugins/check_centreon_nrpe3 -H tagersrv -p 5666 -t 30 -u -2 -P 8192 -c check_centreon_plugin
Hello, I’m posting here because I discovered a weird reaction in the plugin centreon_ups_socomec_netvision_snmpFor example :Context : The inverter has 12% remaining batterySending the following command, /usr/lib/centreon/plugins/centreon_ups_socomec_netvision_snmp.pl --plugin=hardware::ups::socomec::netvision::snmp::plugin --mode=battery --hostname=ipaddress --snmp-community=community --snmp-version='version' --warning-charge-remaining='80’The answer to this request is “OK”If I change the value of warning-charge-remaining from “80” to “10”, the answer is “Warning”It seems we got a warning alert when the real value of battery is GREATER than the probe set Is anyone already encountered that ?Is there a way to invert the process (to get alarmed when the battery gets under the probe) ? Best Regards
Hi,I’ve installed a complete Central using packages.I have no acces to the internet.After installing, I’ve noticed that service cbd is not present.I have reinstalled centreon-broker, but still doesn’t appears cbd service.What can I do to solve this situation?Thank’sMEstherNM
I am about to test the upgrae from 21.10 to 22.10 and I’m trying to deploy a VM with the OVA file but when I open centreon-central-21.10.ova under VMware Workstation 16 Pro, I getFailed to read from file: centreon-central-21.10.ovaI also tried with 22.10 ova file and same result Any suggestions ? Thanks in advanceGaetan
Hi, Im trying to export my old nagios files with the NagiosToCentreon CLAPI, I’ve alredy export the centreon_clapi_import_commands.txt but when I try to do the command /usr/share/centreon/bin/centreon, I can’t access using my web user admin, I get a invalid credentials message. How can I fix this? I’m COMPLETELY sure I have enter the password correctly (I have tried multiple time in the web and it works) Any idea??Thank you